Specifications

58
Shop Accessories
Order Toll Free! 1-800-468-4449
Monday - Friday
7:00am to 3:00pm Pacific Time
Excellent tool for gluing, repairing, or hold-
down projects. This glass-filled nylon hold-
down clamp is designed for workbenches and
work tables. A versatile addition to any tool
box. Quick and easy adjustments to and from
the work using the release locking nut that
slides freely on the threaded shaft. Serrated hold-down jaws prevent slip-
ping and can adjust to work being clamped and locks into position with
the locking lever. Hold-down capacity is 4-1/2” less work bench thick-
ness, and used with 3/4” bench top holes.
$ 4.95
#D2229
. . . . . . . . . . . . . . . . . . .
Open these clamps by squeezing with your fin-
gers, then apply to miter joint. Extremely handy
and useful when clamping small moldings.
Ulmia Spring Miter Clamps
Suited for edge clamping, these 3-way
clamps are fully adjustable for easy use.
Simply secure the two opposing screws to
the workpiece and then tighten the
thumbscrew to hold the edge piece.
2-1/2” maximum reach.
2-1/2" 3-Way C-Clamp
This stop is easily installed into your bench top.
Turn the thumb screw to raise and lower. Very stable
support. Made from a soft metal that will limit harm
to cutting tools if they come in contact with stop.
Flush Mount Bench Stop
The right angle clamp (top illustration) is
used to clamp assemblies perpendicular
(like pulling a shelf into a dadoed cabinet
side), and the regular profile is largely used
to clamp face frames without scuffing.
Lightweight, they only weigh about 1-1/2
lbs. Each. Both clamps can eliminate the
need for long bar clamps.
“No-Scuff” Clamps
Pattern and cabinet maker steel pinch dogs have
square corners over the legs for easy driving. Makes
it a breeze to pull any two boards together.
Pinch Dogs
These miter rings have sharp tips that draw a miter
joint together. Miter ring capacity is the molding size
the ring will clamp. These are strong rings, so an
application tool is necessary.
Ulmia Miter Clamps
#560-3050
#560-3060
$ 5.15
$ 5.45
Up to 5/8” capacity . . . . . . . . . . . .
Up to 1” capacity . . . . . . . . . . . . .
#560-3130 Up to 3/8" $ 1.95
#560-3140 3/8" to 3/4" $ 1.95
#560-3150 9/16" to 1-1/8" $ 2.35
#560-3160 1" to 1-3/4" $ 2.60
#560-3170
1-9/16 to 2-3/4" $ 2.70
#560-3180 2-3/8" to 3-1/2" $ 2.75
#560-3190 Kit w/tool & 8 ea. Rings $ 129.95
#560-3100 Application Tool Only $ 54.65
#D2268
#D2269
$ 14.95
$ 14.95
Right angle clamp . . . . . . . . . . . . . . . . . . . . . .
Face frame clamp . . . . . . . . . . . . . . . . . . . . . .
#160-3004
#160-3006
#160-3008
#160-3010
#160-3012
$ 5.30
$ 5.65
$ 6.00
$ 6.50
$ 7.30
1” Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1-1/2” Width . . . . . . . . . . . . . . . . . . . . . . . . . .
2” Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-1/2” Width . . . . . . . . . . . . . . . . . . . . . . . . . .
3” Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Jorgensen Bench Hold-Down
#1652
$ 13.95
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Shop Fox Quick Release Vises
These heavy cast iron wood vises with pol-
ished guide rods have quick release levers
that disengage the screw for fast and effi-
cient operation. They also feature sliding
dogs for securing long workpieces to the
bench and disappear out of the way when not in use. Jaw width is 7" on
D2524 and 9" on D2525.
A versatile, easy-to-use clamp for holding work in place on
bench tops. Made of solid iron with a black baked-enam-
el finish; holds work securely by simply tapping into 3/4”
hole in bench top (requires pre-drilling). 8” length,
4-1/4” reach.
No more fumbling around trying to hold your
work together. There is nothing to tighten,
turn or twist in order to hold the work piece in
place. Simply push the clamps into position
and you can glue, screw, pin or hold the work
piece together. 90 degree, “T” and butt
joints are aligned automatically, freeing your
hands up to finish jointing the rest of the
project. Accommodates up to 3/4” material thickness. 2 per set.
Jorgensen Bench Hold-Down
Jet Jointer Clamps
#19114
$ 6.95
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
#1708
$ 8.50
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
#D2524
#D2525
$ 55.95
$ 65.95
8” Capacity . . . . . . . . . . . . . . . . . . . . . . . . . .
10-1/4” Capacity . . . . . . . . . . . . . . . . . . . . . .
#709055
$ 19.95
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .