Operation Manual

Helpline No. UK/Northern Ireland 0800 328 6020 Rep. Ireland 00800 4467 5888
E-mail Support [e-mail]
Model Number: GT-EM-02
6
• If coolant should escape from the freezing bowl, the Ice Cream Maker must no longer
be used and must be disposed of. Please read the “Disposal” section.
• Place the Ice Cream Maker on a solid, level surface.
• Keep the Ice Cream Maker away from heat sources.
• Switch the Ice Cream Maker on fi rst and then pour the prepared ice cream mass into
the running machine. Do not switch the Ice Cream Maker off and back on again while
preparing ice cream, otherwise the ice cream mass will freeze solidly to the freezing
bowl and block the stirring paddle.
• When the ice cream mass becomes very fi rm, the rotating direction of the stirring
paddle automatically changes. This is a protective function, so that the motor does
not overheat. If the rotating direction changes constantly, switch the appliance off and
remove the ice cream mass.
• The motor will switch off automatically when it overheats. In this case, switch the
device off, remove the plug and allow the motor block to cool off for at least 1 hour.
• Only use the Ice Cream Maker with the enclosed accessories.
• Do not use any metal items, for example, for removing the fi nished ice cream. These
can damage the interior of the freezing bowl.
Careful when cleaning
• Remove the plug prior to cleaning the motor block.
• The appliance and the freezing bowl must not be cleaned in the dishwasher.
• The appliance must not be immersed in water.
• For cleaning the motor block and the outside of the freezing bowl, please use a soft
cloth that has been slightly dampened with water.
• Leave the freezing bowl to warm up to room temperature prior to cleaning.
• Do not use any aggressive chemical detergents, abrasives, hard sponges, or similar, for
cleaning.