Operation Manual

9
HELPLINE No. U K / N.IRELAND 0800 328 60 20 REP. IRELAND 00 800 44 67 58 88
WEB SUPPORT [e-mail]
Model Number: GT-HMB-01
In order to remove the mixing bowl, you must hold the rotary plate in place.
Turn the mixing bowl anti-clockwise with the other hand as far as it will go.
6. Press the pivot button (6) and fold the mixer down.
Do not allow the mixer to fall. Move the appliance into the lower position.
The beaters/kneading hooks must reach into the ingredients.
This way, the mixer contents are combined better.
Switching On and Off (mixing)
DANGER
Never reach into the rotating inserts. Also keep other kitchen utensils away from
the inserts, e.g. spoons.
CAUTION
The appliance is designed for short-term operation of max. 6 minutes. After this,
the appliance must cool off for approx. 10 minutes before you use it again.
1. Completely unwind the power cable. Insert the plug into a mains socket.
2. Set the on-off switch and speed control (4) to the required mixing level.
The beaters/kneading hooks will start to rotate.
Pay attention to the recipe details regarding mixing duration and mixing level.
3. Set the on-off switch and speed control (4) to 0 Off, to switch off the mixer.
7. If required, adjust the position of the beater/kneading
inserts in the bowl using the slider (9).
- Push slider down and move to the right - the inserts
work near the edge of the bowl.
- Push slider down and move to the left - the inserts
work near the middle of the bowl.
E44342 Standmixer Aldi UK Delta IM.book Seite 9 Montag, 24. Oktober 2011 4:30 16