Operation Manual

Helpline No. UK/Northern Ireland 0800 328 6020 Rep. Ireland 00800 4467 5888
E-mail Support [e-mail]
Model Number: GT-SC-01
5
• Do not allow the power cable to come into contact with hot surfaces, e.g. stove
hotplates, and ensure that the power cable is not trapped or squeezed.
• Lay the mains cable so that it does not become a trip hazard.
• When using an adapter plug or extension cord, these must comply with the valid
safety regulations. The speciÞ ed maximum voltage must not be exceeded.
• Never pull on the cable when removing the plug from the socket, always hold the plug
in order to disconnect the appliance from the mains.
• The appliance must not be used if the power cable is damaged or if the appliance
is otherwise damaged (droppage). Never try to open the appliance yourself or
replace the power cable. Only allow repairs on the appliance to be carried out by
a professional workshop/in the service centre. Improper repairs could result in
signiÞ cant hazards for the user.
CAUTION! Danger to life! Never immerse the slow cooker in
water or other liquids. If the slow cooker has come into contact
with water or other liquids, there is a risk of electric shock.
Immediately disconnect the mains plug!
• The appliance must not be exposed to dripping or spray water.
• The appliance must not be used in wetrooms (e.g. bathroom) or rooms with a high
amount of dust.
• For cleaning, switch off the appliance, remove the mains plug and allow to cool down
completely.
• The appliance is equipped with plastic feet. As the base surfaces are made of diverse
materials and are treated with diverse care products, it cannot be entirely ruled out
that some of these materials contain components, which could attack and soften the
feet. If necessary, place a non-slip base under the feet.
• In case of a thunder storm, appliances connected to the mains could be damaged,
therefore always disconnect the mains plug from the socket during a thunder storm.
• Do not use the appliance outdoors.
Instructions for use
•
Ensure that the socket is near the appliance and can be reached without any
difÞ culties.
• Place the appliance on a stable, even and heat-resistant work surface with at least
20cm distance to other items. The appliance must be not be obstructed upwards.