Dimensions Guide

LAVATORY
FAUCETS
WARRANTY
Submitted Model No.:
Specific Features:
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or
discontinue models, both without notice or obligation. Dimensions are for reference only. See full-line price
book or www.specselect.com for finish options and product availability.
DSP-L-3585LF-MPU Rev. A
3585LF-MPU▲
▲ Designate proper finish suffix
STANDARD SPECIFICATIONS
Grail Series
6" to 16" Centers.
Quick - Snap installation
Two Handle Widespread Deck Mount
3 Hole Sink Applications
0
1
2
3
4
5
0 10 20 30 40 50 60 70 80 90
Pressure (PSI)
)etun
i
M
r
eP
sno
l
l
aG
.
S
.
U(wo
lF
6
0 69 138 207 276 345 414 483 552 621
0
3.8
7.6
11.4
15.1
18.9
22.7
Pressure (kPa)
)
et
u
ni
M
re
P
sr
e
ti
L(w
o
lF
3 15/32"
(88 mm)
4 9/16"
(116 mm)
1 5/8"(42 mm) Min
2 3/8"(61 mm) Max
1 1/4"
(32 mm)
Dia.
1 3/8"
(35 mm)
Dia.
2 1/8"
(54 mm)
Dia.
COMPLIES WITH
• ASME A112.18.1 / CSA B125.1
• ASME A112.18.2 / CSA B125.2
• NSF 61
Indicates compliance to
ICC / ANSI A117.1
• EPA WaterSense
• CSA Certified
®
®
U
P
C
Verified compliant with 0.25% weighted
average Pb content regulations.
55 E. 111th Street, Indianapolis, Indiana 46280
395 Matheson Blvd. E., Mississauga, ON L4Z 2H2
© 2009 Masco Corporation of Indiana
Min. 2 1/2" (64 mm)
Clearance to Back Splash
Recommended
3 X 1 5/16"~1 1/2"
(33~38 mm)
Hole Size
11/8"
(29 mm)
®
• Widespread - 6" (152mm) to 16" (406 mm) centers.
• 4" (102 mm) long, 4 3/4" (121 mm) high, rigid spout.
• Solid brass fabricated end valve and spout bodies.
• Colour coded plug buttons on handles for hot/cold identification.
• Hot and cold stems are interchangeable.
• 1/4 turn handle stops
• Control mechanism shall be of the rotating cylinder type with
stainless steel plate and 180° rotation, with replaceable
non-metallic seats operating in stainless steel lined sockets.
• 3/8" O.D. copper supply tubes.
• 1/2"-14 NPSM adapters.
• Metal drain pop-up type fitting with plated flange and stopper.
• Quick - Snap installation.
• Maximum flow rate 1.5 gpm @ 60 PSI.
• Standard mounting deck thickness can be extended 1"
with RP10612.
®
®
2 5/8"
(67 mm)
6"
(152 mm)
4 3/4"
(121 mm)
2 1/4"
(57 mm)
1 13/16"
(46 mm)
8 1/2"
(216 mm)
1 1/8" (29 mm)
Max. deck
thickness
3/8" O.D. copper
supply tubes
1/2"-14 NPSM adapters