Installation Guide

ManualsBrandsDelta ManualsBath7.795 in. W Towel Roll Rack in Satin Nickel

TOP

Inquiries: 140 Business Park Dr. • Winston-Salem, NC, USA 27107

1-800-542-3789

Phillips screw driver

tournevis Phillips

destornillador en cruz Phillips

Safety goggles

lunettes de sécurit

gafas de seguridad

Level

niveau

nivel

Pencil

crayon

lápiz

Allen wrench

clé Allen

llave Allen

masking / painters’ tape

ruban masque / ruban cache

Cinta adhesiva de papel / para pintor

7A) Using a level to ensure that template is properly aligned vertically and

horizontally, secure the template to the wall with tape. 7B) Using a pencil, mark holes.

Place fully assembled towel rack on the included template on a flat surface and make

sure the post locations of the towel rack align with the post locations of the template.

Read and follow these instructions carefully.

Failure to follow these instructions could result

in injury or property damage.

1) Slide arms (B) onto tube (A) and align holes on the tube.

2) Fasten with screws (L) securely.

10x

Using the allen wrench, loosen the set screws (K) from the bottom

of all the posts and attach posts to mounting brackets. Tighten set screw

with allen wrench.

Gently place the assembly made in step-1 on to the bottom post sub assembly.

Align the holes on the tubes and fasten the screws (M) using allen wrench.

Repeat the process from step 4 to assemble the top post

sub-assembly.

Use screw driver to fix auger wall anchor (J) with wall.

Please note: These installation instructions are intended for typical

1/2-in. drywall and do not include instructions for installing into

wood, tile or stucco. When installing directly into woods studs,

use #6 1 1/4-in. woods screws.

With mounting brackets (G) facing outward, attach provided

screws (H) into installed anchors (J) and tighten with

a screw driver.

Locate mounting hardware before discarding any packaging. Mounting hardware packed

in Red Bag.

These installation instructions are for typical 1/2" drywall.

• For wood stud installation, use #6 x 1-1/4" wood screws.

10x

9 1/2"

[241.3 mm]

24 3/16"

[614.0 mm]

15/16"

[23.3 mm]

CP2766781

Rev 06/06/2016

Summary of content (2 pages)

PAGE 1
TOP 15/16" [23.3 mm] 9 1/2" [241.3 mm] 1x 5x F 2x B 4x E G 8x 1x 8x H Phillips screw driver tournevis Phillips destornillador en cruz Phillips J Allen wrench clé Allen llave Allen D masking / painters’ tape ruban masque / ruban cache Cinta adhesiva de papel / para pintor 2x Safety goggles lunettes de sécurit gafas de seguridad 10x L A 4x Pencil crayon lápiz Level niveau nivel M Locate mounting hardware before discarding any packaging. Mounting hardware packed in Red Bag.
PAGE 2
Care Instructions: Care should be given to the cleaning of this product. Although its finish is extremely durable, it can be damaged by harsh abrasives or polish. To clean, simply wipe gently with a damp cloth and blot dry with a soft towel.