User's Manual

RoHS compliant.
Low profile, SMD type.
High current.
Magnetic shielded.
High energy storage and low DCR.
Provided with embossed carrier tape packing.
Ideal for power source circuits, DC-DC converter, DC-AC inverters
inductor applications.
In addition to the standard versions shown here, customized inductors
are available to meet your exact requirements.
Mechanical Dimension :
Features
25 , 100KHz, 1V
DELTA ELECTRONICS, INC.
(TAOYUAN PLANT CPBG)
252, SAN YING ROAD, KUEISAN INDUSTRIAL ZONE, TAOYUAN SHIEN, 333, TAIWAN, R.O.C.
TEL: [phone]; FAX: [phone]
http://www.deltaww.com
SMT Power Inductor
HMU1345, 1350, 1356, 1358, 1360M & 1362M Type
O
C
¡Ó
Electrical Characteristics :
139
UNIT : mm/inch
A = 12.60 0.4 / 0.496 0.016
B = 12.70 0.3 / 0.500 0.012
D = 8.95 / 0.352
E = 2.50 / 0.098
F = 9.50 / 0.374
G = 4.30 / 0.169
H = 1.90 / 0.075
RECOMMENDED PAD PATTERNS
8.4
3.0
3.8
10.0
C
D
E
F
G
B
H
H
A
13.5
L
(uH)
Li
(uH) MIN.
HEIGHT "C"
(mm/inch) MAX.
I
2
sat
(Adc)
(m ) MAX
DCR
rms
I
(Adc)
3
1
1. Tolerance of inductance is 20%.
2. Isat is the DC current which cause the inductance drop to Li.
O
3. Irms is the DC current which cause the surface temperature of the part increase less than 45 C.
OO
4. Operating temperature : -20 C to 105 C ( including self-temperature rise ).
HMU1345-3R2 3.2 2.56 9.0 9.2 9.5 4.5 / 0.177
HMU1345-5R6 5.6 4.50 14.5 5.8 8.0 4.5 / 0.177
HMU1350-1R4 1.4 1.12 3.7 16.0 14.0 5.0 / 0.197
HMU1350-1R6 1.6 1.28 3.7 15.0 14.0 5.0 / 0.197
HMU1350-4R0 4.0 3.20 3.7 7.0 14.0. 5.0 / 0.197
HMU1356-0R4 0.4 0.32 1.1 40.0 26.0 5.6 / 0.220
HMU1356-0R6 0.6 0.48 1.1 40.0 26.0 5.6 / 0.220
HMU1356-0R6HS 0.6 0.48 1.9 34.5 20.0 5.6 / 0.220
HMU1356-0R8 0.8 0.64 1.9 31.0 20.0 5.6 / 0.220
HMU1356-1R0LD 1.0 0.80 1.9 25.0 20.0 5.6 / 0.220
HMU1356-1R4 1.4 1.12 3.8 15.5 14.5 5.6 / 0.220
HMU1356-4R4 4.4 3.52 8.0 12.5 10.0 5.6 / 0.220
HMU1356-4R7HS 4.7 3.76 11.4 10.5 8.2 5.6 / 0.220
HMU1358-4R7 4.7 3.76 7.5 9.0 10.0 5.8 / 0.228
HMU1360M-3R1 3.1 2.48 8.0 14.0 10.0 6.0 / 0.236
HMU1362M-5R2 5.2 4.16 9.2 11.0 9.5 6.2 / 0.244