Specification

Liberty Hardware Manufacturing Corporation • 140 Business Park Drive • Winston-Salem, NC 27107 • 800.542.3789 • www.libertyhardware.com

"B"

2 9/16"

[65.0 mm]

2 5/8"

[66.3 mm]

"A"

Lyndall

ASSIST BAR ASSEMBLY

LENGTH A (Centre to Centre) B (Total Length)

9" 9" (228.6 mm) 11 9/16" (293.6 mm)

16" 16" (406.4 mm) 18 9/16" (471.4 mm)

18" 18" (457.2 mm) 20 9/16" (522.2 mm)

24" 24" (609.6 mm) 26 9/16" (674.6 mm)

32" 32" (812.8 mm) 34 9/16" (877.8 mm)

36" 36" (914.4 mm) 38 9/16" (979.4 mm)

MATERIALS: Assist bar is constructed using 7/8" diameter 20 gauge stainless steel tubing.

Decorative post is cast in zinc.Meets ADA and ANSI A117.1-2003 for form and

load bearing requirements

INSTALLATION: Install Assist bar with 3 - #10 x 2-1/2" flat head stainless steel screws provided for

each end wall flange.

OPTIONAL FASTENER INFORMATION:

Wall studs or Wood blocking is preferable behind all wall surfaces. If wood blocking is

not available, the following fasteners are suggested: Non-Stud Wall anchor.

SPECIFICATION: Surface mounted Assist Bar shall be model___________________________

(fill in model number) by Liberty Hardware Manufacturing Corporation.

TECHNICAL DATA

PAGE 1
TECHNICAL DATA Lyndall ASSIST BAR ASSEMBLY "A" 2 5/8" [66.3 mm] 2 9/16" [65.0 mm] "B" MATERIALS: Assist bar is constructed using 7/8" diameter 20 gauge stainless steel tubing. Decorative post is cast in zinc.Meets ADA and ANSI A117.1-2003 for form and load bearing requirements INSTALLATION: Install Assist bar with 3 - #10 x 2-1/2" flat head stainless steel screws provided for each end wall flange. OPTIONAL FASTENER INFORMATION: Wall studs or Wood blocking is preferable behind all wall surfaces.