Instruction manual

3–16 MM300 MOTOR MANAGEMENT SYSTEM – INSTRUCTION MANUAL
GRAPHICAL CONTROL PANEL CHAPTER 3: CONTROL PANEL OPERATION
3.1.3.4 Date, time, and IP entry
The entry process for date, time, and IP setpoints follows the same convention as numeric
setpoints, where the day, month, year, hour, minute, second, and each octet of the IP
address are entered as separate fields. Input verification is performed for all fields of the
setpoint when the ENTER key is pressed. As these are standard formats, the minimum,
maximum and step value displays are removed. For date and time setpoints, a format
string of DD/MM/YYYY or HH:MM:SS is included as a part of the setpoint label for reference
when entering a new value.
Figure 23: IP address setpoint editor
3.1.3.5 Security access
There are three levels of security access allowing write access to setpoints, lockout reset,
and firmware download. When there are no pop-ups present, a sustained press on the ESC
key clears the security passcode. When operations are performed that require a higher
level of security, a passcode entry dialog box automatically opens (for example, in entering
factory page at read only security access).
Figure 24: Password entry dialog box
The encrypted key information appears only when the current security access level is 0.