Instruction manual

Fig. 5

Fig. 6

Fig. 7

FASTENING MACHINE TO

SUPPORTING SURFACE

MOVING CUTTINGHEAD TO THE UP POSITION

1. Push down on switch handle (A) Fig. 5 and pull out cuttinghead lock knob (B).

2. Move the cuttinghead (C) to the up position (Fig. 6).

ATTACHING DUST BAG

1. Attach dust bag (A) Fig. 7 to the dust spout (B)

making sure the wire ring (C) is engaged between the

ridges in the spout.

Before operating your compound miter saw, make sure

it is firmly mounted to a sturdy workbench or other

supporting surface. Four holes are provided, two of which

are shown at (A) Fig. 8.

When frequently moving the saw from place to place, we

suggest that the saw be mounted to a 3/4″ piece of

plywood. Use “C” clamps to secure the plywood to a

supporting surface.

Fig. 8