Specifications

DELTA LTL-XL Retroreflectometer 19
SETTING UP FOR MEASUREMENTS
Selecting a User ID
The user ID (user profile) is used to identify the operator and is saved in the log together with
each measurement. If enabled, it can be seen at the lower left side of the measurement display.
Measurements can also be taken without a user ID. Unlimited user ID’s can be stored in the
instrument.
Certain instrument settings are stored individually for each user. Selecting a user will restore
these settings. All settings can be stored
The select procedure.
If a user select icon is not seen in the upper icon row:
Press the MENU button and select SETTINGS / USER / SELECT to display the USER menu.
1. If a user select icon is seen in the upper icon row:
Press the UP button. Then, if necessary use the LEFT or RIGHT button to highlight
the user icon. Press the OK button. The USER menu is shown:
Now use the UP or DOWN button to highlight a user name. Press the OK button to accept the
name.
Changes made to the above mentioned individual instrument settings are automatically stored
in the selected user ID.
Selecting OFF will deactivate the user function and set all individual instrument settings to
default.