Specifications

20 LTL-XL Retroreflectometer DELTA
Edit user
User names can be edited from the menu SETTINGS / USER / EDIT (see editing pg. 35).
New user
A new user can be entered from the menu SETTINGS / USER / NEW (see editing pg. 35).
Clear user
Deleting the User ID will remove the user and settings from the memory.
Select at start
Enabling SEL. AT START will force the user to select a user ID each time the LTL-XL is
turned on.
Press the MENU button and select SEL. AT START. Press OK to toggle between YES and
NO
Selecting a road marking icon
The purpose of a road marking icon.
The road marking icons are used as labels for the individual measurement corresponding to
the measured road marking and will be saved in the log together with the measuring result.
The icon will then be presented together with the corresponding measurement when viewing
the log or by using the RSC program (see pg. 36).
There are 29 fixed icons to select from. Six of the icons can be programmed as individual pre-
sets for each series (see pg. 30) and will be ready for selection when a series is selected.
The procedure.
From the HOME screen press the DOWN button. Then use the LEFT or RIGHT button to high-
light the wanted icon. Pressing DOWN steps through and displays the five icon rows. Pressing
UP will return to the HOME screen without selecting a new icon.
Pressing the OK button will activate the selected icon. The selected icon is now shown in the
left side of the measuring field and the instrument is again ready for measuring.