Specifications

30 LTL-X Retrometer DELTA
SERIES ID
Working with series ID (name)
The purpose of a series ID.
The series ID is a label. For example, it could be the name of the road.
Although measurements can be performed without selecting a series ID, it is convenient to
group (name) the measurements for each geographical spot, road or part of a road for easier
recognition of each measurement.
The series ID for such a group of measurements will be saved in the log together with the
measuring results. The ID must be selected prior to the measurement.
The individual measurements in a group can further be labeled by selecting a road marking
icon (see pg. 31) corresponding to the actual road. Measurements taken with the same series ID
are automatically marked with a unique number.
The instrument can store 250 series ID’s.
The series ID can be entered manually but it is far more convenient to enter the series ID’s in
the RSC program (see pg. 40) and transfer them to LTL-X.
Activate
To use the series ID it must be activated. Press the MENU button and select: SERIES ID /
ACTIVATE. By pressing OK you can toggle between ON and OFF, to activate or deactivate the
series ID function. Press the HOME button to return to the HOME screen. When the series ID
is off no ID is shown in the display and ID’s in the log marked: “No name”.
Selecting a series ID
From the HOME screen press UP. If necessary, use the LEFT or RIGHT button to highlight the
road icon . Press the OK button. The SELECT SERIES menu is shown:
SELECT SERIES: OK
NEW
ROAD #2
HIGHWAY #1
HIGHWAY #2
HIGHWAY #3
Now use the UP or DOWN button to highlight a series name. If the symbol ">" is displayed in
the top right corner then more series can be accessed by pressing the RIGHT button.
Press the OK button to accept the name. The instrument will now return to the HOME screen.
Enter a new series ID
Do the same as above but select NEW from the series list (or select MENU / SERIES ID /