Users Manual

Delta Confidential
7
- Search Button
:
Select Sub-1G and click Search button to
start DC1 setting process.
Connection
Auto RS485 Wi-Fi Sub-1G
Search
DC1 SETTING
France
925 MHz
Grid Code
Frequency
Search Inverters
Quality : 100
If the quality value is not 100,
there might be some devises are
using this frequency band.
Communication may be disturbed
by these devices.
Connection
:
:
Block 1Block :
Block Setting
Auto RS485 Wi-Fi Sub-1G
Search
Scan Frequency
Every Data collector in same plant
should be set an unique Block ID
carefully.
Duplicated Block ID is not allowed.
-
-
SYNC TIME
GET INFOSET INV
-
Searching Inverters ...
Grid Code : Select specific grid codes for
utility. Will be written into inverters.
Frequency : Select the desired frequency
to scan for quality.
1. Scan one frequency is 10 s.
2. Quality = 100 is OK to use.
Quality < 100 has been used.
3. Sort : Good (top) Æ Bad (bottom)
Connect to DC1 And Setting
Please select country and grid code, then go to home page |
--------------------------------------------
--------------------------------------------
If this data collector isn’t set up yet, APP
will direct to this page and start the
following set up procedure ( page 9-13 ).
915 MHz
IEEE1547