Specification

Liberty Hardware Manufacturing Corporation • 140 Business Park Drive • Winston-Salem, NC 27107 • 800.542.3789 • www.libertyhardware.com

[76.3 mm]

"B"

2 15/16"

[74.5 mm]

"A"

Lyndall

GRAB BAR ASSEMBLY

LENGTH A (Centre to Centre) B (Total length)

9" 9" (228.6 mm) 12" (304.9 mm)

12" 12" (304.8 mm) 15" (381.1 mm)

16" 16" (406.4 mm) 19" (482.7 mm)

18" 18" (457.2 mm) 21" (533.5 mm)

32" 32" (812.8 mm) 35" (889.1 mm)

36" 36" (914.4 mm) 39" (990.7 mm)

MATERIALS: Grab bar is constructed using 1-1/4" diameter 20 gauge 304 stainless steel tubing.

Decorative posts and trim rings are cast in zinc. Trim rings are held in place using a

friction fit. Meets ADA and ANSI A117.1-2003 for form and load bearing requirements.

INSTALLATION: Install grab bar with 3 - #10 x 2-1/2” flat head stainless steel screws provided for

each end wall flange. Slide cover flanges over wall flanges and press firmly to

complete installation.

OPTIONAL FASTENER INFORMATION:

Wall studs or Wood blocking is preferable behind all wall surfaces. If wood blocking is

not available, the following fasteners are suggested: Non-Stud Wall anchor.

SPECIFICATION: Surface mounted Grab bar shall be model___________________________

(fill in model number) by Liberty Hardware Manufacturing Corporation.