User Manual

9 Register Reference
Type:
Communications Register
RMC70 Address:
%MD21.11. See Register Map topic for other address formats.
RMC150
Address:
%MD45.11. See Register Map topic for other address formats.
System Tag:
_Enet.Config
How to Find:
Address Selection Tool → Controller → Communication Settings →
Ethernet
Data Type:
DWORD
Accessibility:
Read/Write
This register indicates the state of various Ethernet communication items.
Bit
Tag Name
Description
0
_Enet.Config.ManConfig
Disable Auto-Negotiation
True: Auto-Negotation is disabled.
False: Use Auto-Negotation (use bits 1 and 2).
1
_Enet.Config.Man100Mbps
100 Mbps
Valid only if _Enet.Config.ManConfig is True.
True: Ethernet speed is set to 100 Mpbs.
False: Ethernet speed is set to 10 Mpbs.
2
_Enet.Config.ManFDX
Full Duplex
Valid only if _Enet.Config.ManConfig is True.
True: Ethernet is set to full-duplex.
False: Ethernet is set to half-duplex.
3-4
_Enet.Config.IPAddrMode
IP Address Assignment Mode
Specifies how the RMC obtains its IP address.
0: Statically Assigned
1: BOOTP
2: DHCP
5
_Enet.Config.LockIP
Lock IP Settings
True: IP address settings cannot be changed via
Ethernet.
False: IP address settings can be changed via
Ethernet.
6
_Enet.Config.LockFW
Lock Firmware Update via Ethernet
True: Firmware cannot be updated via Ethernet.
False: Firmware can be updated via Ethernet.
9.2.3.3. Controlling Connection Status
Type:
Communications Register
RMC70 Address:
%MD21.23. See Register Map topic for other address formats.
RMC150
Address:
%MD45.23. See Register Map topic for other address formats.
System Tag:
_Enet.CCStatus
deltamotion.com 1003