User Manual

RMC70/150 and RMCTools User Manual
F21:2
10757
D10756
REAL
%MD21.2
DINT
Read Only
RS-232 Monitor Protocol
F21:3
10759
D10758
REAL
%MD21.3
DINT
Read Only
RS-232 Monitor Address
F21:4
10761
D10760
REAL
%MD21.4
DINT
Read Only
PROFIBUS: Station Address
Indicates the current PROFIBUS station
address, as selected by the rotary
switches on the front of the RMC75P.
Possible values are from 0-99, although
zero (0) is not a valid station address.
F21:5
10763
D10762
-
%MD21.5
-
-
Reserved
F21:6
10765
D10764
DWORD
%MD21.6
DWORD
Read Only
PROFIBUS Connection Status
RMC70 Registers, File 22: Event Log Configuration
This file is used by RMCTools to configure Event Log filtering. It should not be edited directly.
Instead use the Event Log Properties to change these settings from within RMCTools.
RMC70 Registers, File 23: Discrete I/O
All Discrete I/O registers are Read/Write.
Tip:
For the DF1/CSP addressing format, all 'F' type registers (32-bit floating point) can also be
read as 'L' type (32-bit word) registers. This is very useful when reading registers with
DWORD or DINT external data types.
AB
DF1,
CSP
Address
Modbus
TCP,
RTU
Address
FINS
Address
External
Data
Type
Internal
IEC
Address
Internal
Data
Type Tag Name
Register
Name
F23:0
11777
D11776
DWORD
%MD23.0
DWORD
_DIO.State[0]
Current
state of
discrete
I/O - bits
0-31
F23:1
11779
D11778
DWORD
%MD23.1
DWORD
_DIO.State[1]
Current
state of
discrete
I/O - bits
32-64
F23:2
11781
D11780
DWORD
%MD23.2
DWORD
_DIO.Type[0]
I/O Type -
bits 0-31
F23:3
11783
D11782
DWORD
%MD23.3
DWORD
_DIO.Type[1]
I/O Type -
bits 32-64
F23:6
11789
D11788
DWORD
%MD23.6
DWORD
_DIO.OffInProgram[0]
Output to
Off in
PROGRAM
mode -
bits 0-31
F23:7
11791
D11790
DWORD
%MD23.7
DWORD
_DIO.OffInProgram[1]
Output to
Off in
PROGRAM
1064 Delta Computer Systems, Inc.