User Manual

9 Register Reference
Uploaded
F45:5-255
23051-
23551
D23050
D23550
*
%MD45.5-
255
*
Read Only
Plot Data
Plot 6
F46:0
23553
D23552
DINT
%MD46.0
UDINT
Read/Write
Plot Flags
F46:1
23555
D23554
DINT
%MD46.1
UDINT
Read/Write
Plot Requested
Read Samples
F46:2
23557
D23556
DINT
%MD46.2
UDINT
Read/Write
Plot Current Index
F46:3
23559
D23558
DINT
%MD46.3
UDINT
Read Only
Plot Plot ID
F46:4
23561
D23560
DINT
%MD46.4
UDINT
Read Only
Plot Samples
Uploaded
F46:5-255
23563-
24063
D23562-
D24062
*
%MD46.5-
255
*
Read Only
Plot Data
Plot 7
F47:0
24065
D24064
DINT
%MD47.0
UDINT
Read/Write
Plot Flags
F47:1
24067
D24066
DINT
%MD47.1
UDINT
Read/Write
Plot Requested
Read Samples
F47:2
24069
D24068
DINT
%MD47.2
UDINT
Read/Write
Plot Current Index
F47:3
24071
D24070
DINT
%MD47.3
UDINT
Read Only
Plot Plot ID
F47:4
24073
D24072
DINT
%MD47.4
UDINT
Read Only
Plot Samples
Uploaded
F47:5-255
24075-
24575
D24074-
D24574
*
%MD47.5-
255
*
Read Only
Plot Data
*The Data Types of the Plot Data are determined by the plotted registers.
RMC70 Registers, Files 48-55: Static Plot Upload Area Registers
All Static Plot Upload Area Registers are Read Only. See the Reading Plots with a Host
Controller topic for details on how to use them.
The data types of the plot data is determined by the plotted registers.
Tip:
For the DF1/CSP addressing format, all 'F' type registers (32-bit floating point) can also be
read as 'L' type (32-bit word) registers. This is very useful when reading plot data of DWORD
or DINT data types.
Note:
When communicating via a protocol that uses DF1 addressing, samples 0-4095 from each plot
can be addressed, if the host controller allows it. For example, F112:4095 addresses sample
4095 of plot 0, sample set 0.
Other protocols can only address the first 256 samples, as indicated below.
AB
DF1,CSP
Address
Modbus
TCP,RTU
Address
FINS
Address
Internal
IEC
Address Register Name
Plot 0
F48:0-255
24577-25087
D24576-D25086
%MD48.0-255
Plot 0, Sample Set 0, Samples 0-
255
deltamotion.com 1087