Installation Sheet
®
®
U
P
C
Submitted Model No.: _______________________________________________
Specific Features: __________________________________________________
STANDARD SPECIFICATIONS:
• Pressure balanced single handle bath
mixing valve.
• Requires 1 1/2" (38 mm) wall cavity.
•
Back-to-back installation capability.
•
Solid brass fabricated body.
• LHP-Less Handle Program. See available
handle options on back.
• Monitor
®
with Scald-Guard
®
valve. Maintains
a balanced pressure of hot and cold water
even when a valve is turned on or off
elsewhere in the system.
• Temperature only controlled with handle.
• Field adjustable to limit handle rotation into
hot water zone.
• 120° maximum handle rotation.
• All parts shall be replaceable from the front
of the valve.
1424-LHP
0
1
2
3
4
5
0 102030405060708090
Pressure (PSI)
Flow (U.S. Gallons Per Minute)
6
0 69 138 207 276 345 414 483 552 621
0
3.8
7.6
11.4
15.1
18.9
22.7
Pressure (kPa)
Flow (Liters Per Minute)
Showerhead
UL Listed to US and Canadian
Safety Standards
21PL
BATH MIXING
VALVES
■ Shower Only
■ Single Handle
■ LHP-Less Handle Program
■ Monitor
®
with Scald-Guard
®
Valve
■ Pressure Balance
■ Temperature Only Controlled
with Handle
COMPLIES WITH:
•
ASME A112.18.1M-1996
•
ASSE 1016-1996
•
CSA B125-93
Indicates ADA compliance to
CABO/ANSI A117.1-1992
•
Showerhead GSA A-A-240
•
ASSE Seal Authorized
•
City of L.A. approved
•
CSA Certified
•
IAPMO Listed
3 1/2"
(89 mm)
A
7"
(178 mm)
B
2"
(51 mm)
1/2"
(13 mm)
Face of plasterguard
should be flush with
finish wall line
Maximum
Allowable Deviation
Supply
CL Supply
Lines
Dimensions
I.P.S. or C.W.T. 2 3/8" 5/8"
I.P.S. or C.W.T. with stops 5 5/16" 3/8"
A
B
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference only.
2.D.10