Installation Guide

36
For optimal water retention, the inner door panel should be closest to the shower head
during use.
Para obtener la retención de agua óptima, el panel de puerta interior debe ser el más
cercano al cabezal de ducha durante el uso.
Identify the two angle blade seals (G).
On inner glass panel, install angle blade seal (G) on edge
of glass closest to shower head.
Align seal with TOP of glass panel such that the seal will
not interfere with bottom bumper.
Angled blade of seal should orient INTO the shower as
shown.
Identifique las dos juntas de hoja en ángulo (G).
En el panel de vidrio interior, instale la junta de hoja en
ángulo (G) en el borde del vidrio más cercano al cabezal
de ducha.
Alinee la junta con la PARTE SUPERIOR del panel de
vidrio de manera que la junta no interfiera con el tope
inferior.
Como se muestra, la hoja en ángulo de la junta debe
orientarse HACIA ADENTRO de la ducha.
55
G
J