Measurement Guide

Delta Shower Door
Measurement Guide
Need Additional Assistance with Delta Shower Doors?
Call us at 1.800.964.4850
Visit us at www.deltashowerdoors.com
Email us at [e-mail]
©2021 LHMC, A Masco Company
**Disclaimers
• For ceramic tile application, use the top of the tile
for the maximum door height.
• In older homes the opening at the top is often wider
than the bottom due to an out-of-plumb condition.
• NOTE: All Delta Shower Doors are designed to
accommodate out-of-plumb conditions totaling 3/8”.
RECORD DIMENSIONS BELOW
Opening
Height (A):
Width of
widest point (B):
Width at
narrowest point (B):
A
B
B
Sliding Shower Doors
A
B
B
Sliding Tub Doors
Before you customize your dream door, you need to make sure you have the correct measurements:
Identify Vertical and Horizontal Openings
Height (A) and Widths (B). Widths (B) measurements are often not the same so
doors can be adjusted up to 3/8".
Vertical Opening
Measure from the top of the tub apron or the top of the threshold up to the top of the
acrylic (or tile) surround wall.
Horizontal Opening
Measure width of opening at the top and the bottom of the enclosure.
Available Sizes:
• 48" Shower
- Opening Requirement for Installation: fits doors with opening between
42-1/4" minimum – 48" maximum
- Finished Door Height: 76”
- Minimum Required Clearance Height for Installation: 77”
- Sill/Threshold Depth Requirement for Installation: 3-7/8”
- Studs required 2-1/4" from front surface of sill
• 60" Shower
- Opening Requirement: fits doors with opening between 51-1/2" minimum
– 60" maximum
- Finished Door Height: 76”
- Minimum Required Clearance Height for Installation: 77”
- Sill/Threshold Depth Requirement for Installation: 3-7/8”
- Studs required 2-1/4" from front surface of sill
• 60" Tub
- Opening Requirement: fits doors with opening between 51-1/2" minimum
– 60" maximum
- Finished Door Height: 62-1/4”
- Minimum Required Clearance Height for Installation: 77”
- Sill/Threshold Depth Requirement for Installation: 3-7/8”
- Studs required 2-1/4" from front surface of sill
NOTE: the height will be different
for shower doors vs. bathtubs.