Installation Guide

10
4
2
3
L
TOP TRACK BRACKET PLACEMENT
Using a stud finder, ensure that each of the side walls of
the shower enclosure have a stud which is over the sill.
Using a pencil, mark the location of the studs as shown.
Repeat for other side of enclosure.
COLOCACIÓN DEL SOPORTE DE CARRIL SUPERIOR
Con el uso de un detector de montantes, asegúrese de
que cada una de las paredes laterales del recinto de la
ducha tiene un montante que está sobre el apoyo.
Como se muestra, marque la ubicación de los montantes
con un lápiz. Repítalo para el otro lado del recinto.
Place corner bumper (L) into the location against sill and
side wall as shown. The line on the side of the bumper
should be horizontal.
Tape in place. Repeat for remaining bumper.
Coloque el tope de esquina (L) en la ubicación contra el
apoyo y la pared lateral, como se muestra. La línea en el
lado del tope debe estar horizontal.
Coloque la cinta en la posición correspondiente. Repita
el procedimiento con cada tope restante.