Specification Sheet

ManualsBrandsDelta ManualsTub FaucetsDelta Single Handle Tub Valve Trim with Metal Blade Handle from the Commercial Series

See current price list for product availability.

000

Engineer/Architect Approval

Model Specified:

Approval: Date:

PRODUCT VARIATION

SHOWER

HANDLE

222

111

333

555

777

999

444

666

888

✔✔✔

MultiChoice

™

Universal

Pressure Balance Tub and Shower

Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation.

Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability.

DSP– T13H1 Rev. C

TUB AND SHOWER DESCRIPTION PRODUCT NO.

ROUGH-IN Valve R10000-UNWS

FINISH TRIM only T13H

Specify ''0''

When No Shower

Outlet Required

Shower Valve Only

Standard Brass Fixed

Spray Showerhead

Arm & Flange

2.2 USGPM (8.4 L/min.)

Tub and Shower

3-Function Touch-

Clean Showerhead,

Arm & Flange

2.5 USGPM (9.5 L/min.)

Showerhead

Arm & Flange

1.5 USGPM (5.7 L/min.)

57mm (2.24'')

Lever Blade

Handle

85mm (3.33'')

Metal Lever

Handle

Handshower, 610mm (24'')

S/S Grab Bar with ADA

Slide 1.5 USGPM

(5.7 L/min.) (1)

30° Vandal Resistant

Cast Wallmount

Showerhead

1.5 USGPM (5.7 L/min.)

Specification: (example)

❏ R10000-UNWS ROUGH-IN only

• Concealed in-wall MultiChoice

™

universal valve

• Back-to-back capability, Integral screwdriver stops

• Heavy Duty forged brass valve body

• 1/2" Universal inlets to accept 1/2" copper,

1/2" iron pipe, PEX or CPVC adaptors

• 1/2" Male thread inlets/outlets

❏ FINISH TRIM ONLY:

• Pressure Balancing cartridge with checks

• Polished chrome plated finish

• Non-removeable red/blue temperature markings

and … with … (add product variation)

with … (add shower)

with … (add valve handle)

T13H153

T13H162

Set screw shower arm flange supplied on Shower Option No. 1, 2, 3 and 8. (1) Two check valves in handshower. Flowrates are at 80 PSI.

Refer to www.specselect.com for individual models. See Page DSP-SHWA Rev. C for Add-On options available.

See Page DSP-B-R10000-HDF for additional Rough-In options.

Note: Use this page front and back as a product submittal sheet.

Okinetic Technology

Showerhead, Arm &

Flange, 1.5 USGPM

(5.7 L/min.)

TECK

COMMERCIAL

Summary of content (3 pages)

PAGE 1
MultiChoice™ Universal Pressure Balance Tub and Shower TECK® COMMERCIAL Specification: (example) ❏ R10000-UNWS ROUGH-IN only • • • • Concealed in-wall MultiChoice™ universal valve Back-to-back capability, Integral screwdriver stops Heavy Duty forged brass valve body 1/2" Universal inlets to accept 1/2" copper, 1/2" iron pipe, PEX or CPVC adaptors • 1/2" Male thread inlets/outlets T13H162 ❏ FINISH TRIM ONLY: • Pressure Balancing cartridge with checks T13H153 • Polished chrome plated finish • Non-remove
PAGE 2
TECK® COMMERCIAL Approvals: • CSA certified • Complies to ASME A112.18.1 • Pressure Balance Handle ADA Compliant and meet Handicapped Accessibility Standard ASME A117.1 of less than 5 lbs. operating force. • Pressure Balance Valve ASSE 1016 • Handshower back flow protection provided by two integral certified check valves in series, which operate independently, ASME A112.18.3 MultiChoice™ Universal Pressure Balance Tub and Shower 70 mm (2.75") 117 mm (4.6") and ASME A112.18.1 / CSA B125.1.
PAGE 3
FAUCET COMPANY June 2009 TO WHOM IT MAY CONCERN Delta Faucet Company handshowers are certified as being compliant to the national consensus standard ASME A112.18.1/CSAB125.1 for Plumbing Supply Fittings. This standard is referenced in many state/provincial and city codes as well as the International Plumbing Code, the Uniform Plumbing Code and the Canadian Plumbing code.