Specification

ManualsBrandsDelta ManualsBathCommercial Single-Handle 2-Spray Tub and Shower Faucet in Chrome (Valve Not Included)

Tub and Shower

MultiChoice™ Univ. Press. Bal. Tub &

Showers

Model No: T13H253

SPECIFICATION:

Polished chrome plated finish

· Pressure Balance cartridge

· Limit stop for pre-setting Maximum temperature

· Integral checks in the cartridge prevent crossflow between Hot and

Cold water inlets

· Blue/Red visual cover indicator for Cold, Mixing and Hot handle

positions

· Integral screwdriver stops

· 1/2" Universal in lets to accept 1/2" copper, 1/2" iron pipe, PEX or

CPVC adaptors

· 1/2" Male thread inlets/outlets

· TRIM ONLY for Tub and Single shower Unit

· Requires separate order of R10000-UNWS Rough-in

· Spout: - - 1/2" IPS metal spout with pull up diverter

· Handle#: 3 - Lever Blade Handle-ADA compliant-57 mm (2.24")

· -

· Handshower with standard 610mm (24") combination S/S slide/grab

bar-2.5USGPM--backflow protection provided by two integral check

valves in handshower

COMPLIES WITH:

CSA certified.

· Complies to ASME Standard A112.18.1.

· IAPMO listed

· Pressure Balance Valve ASSE 1016

· Handshower back flow protection provided by two integral certified

check valves in series, which operate independently, ASME

A112.18.3 and ASME A112.18.1 / CSA B125.1

· (Contact Delta Representative for State and/or Local Approvals)

· Pressure balance handle {ADA} ADA compliant and meets

Handicapped Accessibility Standard ASME 117.1 of less than 5 lbs

operating force

· {ADA}ADA compliant adjustable slide mechanism on slide/grab bar

· Integral check valves in handshower comply to ASME Standard

A112.18.3 for backflow protection

(Dimensional drawing on following page)

OPERATION:

Not Available

Delta reserves the right (1) to make changes to specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference.

Measurement may vary plus or minus 6mm(0.25"). Mounting locations are suggested only. Check with local codes for requirements in your area.

SpecSelect Online - 1.0.5

Page of1 2

Delta Faucet Company - 55 East 111th St. - Indianapolis, Indiana, USA 46280 - (317) 848-1812

Delta Faucet Canada - 395 Matheson Blvd E - Mississauga, Ontario, Canada L4Z 2H2 - (905) 712-3030

Summary of content (2 pages)

PAGE 1
Tub and Shower MultiChoice™ Univ. Press. Bal. Tub & Showers Model No: T13H253 · · · · · · · · · COMPLIES WITH: SPECIFICATION: CSA certified. Complies to ASME Standard A112.18.1. IAPMO listed Pressure Balance Valve ASSE 1016 Handshower back flow protection provided by two integral certified check valves in series, which operate independently, ASME A112.18.3 and ASME A112.18.1 / CSA B125.
PAGE 2
Model No: T13H253 Delta reserves the right (1) to make changes to specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference. Measurement may vary plus or minus 6mm(0.25"). Mounting locations are suggested only. Check with local codes for requirements in your area. Delta Faucet Company - 55 East 111th St.