Specification Sheet

ManualsBrandsDelta ManualsCommercial ProductsDelta Commercial Pressure Balanced Shower Trim with Handshower, Slide Bar, and Diverter - Less Rough-In Valve

Delta reserves the right (1) to make changes in speciﬁ cations and materials, and (2) to change or discontinue models, both without notice or obligation.

Dimensions are for reference only. See current full-line price book or www.specselect.com for ﬁ nish options and product availability.

MultiChoice

Universal Pressure Balance Tub and

Shower with Diverter Valve for Dual Showers

See DSP-B-R10000-HDF for additional Rough-In options.

Refer to www.specselect.com for individual models. Note: Use this page front and back as a product submittal sheet.

DSP–T13H3 Rev. I Page 2.C.7

0 0 0

PRODUCT VARIATION

SHOWER

HANDLE

2 22

1 11

3 33

Okinetic Technology

Showerhead, Arm &

Set Screw Flange

Specify “0”

When No Shower

Outlet Required

3-Function Touch-Clean

Showerhead, Arm &

Set Screw Flange

Showerhead, Arm &

Set Screw Flange

57mm (2.24")

Lever Blade

Handle

30° Vandal Resistant

Cast Wallmount

Showerhead

Tub & Shower

(Same as No. 3

above) but with

Diverter Spout

T13H923

Shower, Handshower

with 2 Check Vlaves,

Diverter Valve,

610mm (24") S/S Bar

with ADA Slide

Specification: (example)

o R10700-UNWS ROUGH-IN only

• Concealed in-wall MultiChoice

Universal valve

• Back-to-back capability,

Integral screwdriver stops

•

Heavy Duty forged brass valve body,

• 1/2" Universal inlets to accept 1/2" copper,

1/2" iron pipe, PEX or CPVC adaptors

• 1/2" Male thread inlets/outlets

• In-wall diverter valve

o T13H _ _ _ - _ _ _ FINISH TRIM ONLY:

• Pressure balancing cartridge with checks

• Polished chrome plated finish

• ADA compliant diverter handle

• Non-removeable red/blue temperature markings

and … with … (add product variation)

with … (add shower)

with … (add valve handle)

TUB AND SHOWER DESCRIPTION PRODUCT NO.

ROUGH-IN with Diverter Valve & Stops R10700-UNWS

FINISH TRIM only T13H

FINISH TRIM ONLY:

85mm (3.33")

Metal Lever

Handle

Engineer/Architect Approval

Model Speciﬁ ed:

Approval: Date:

4 4 4

SHOWER FLOW RATES

SHOWER #

ACTUAL

@ 45 PSI

(310 kPa)

MAXIMUM

@ 80 PSI

(552 kPa)

Handshower

in PV #3

1.13 gpm

(4.3 L/min)

1.5 gpm

(5.7 L/min)

Handshower

in PV #9

1.13 gpm

(4.3 L/min)

1.5 gpm

(5.7 L/min)

1.7 gpm

(6.4 L/min)

2.0 gpm

(7.6 L/min)

1.13 gpm

(4.3 L/min)

1.5 gpm

(5.7 L/min)

1.4 gpm

(5.3 L/min)

1.5 gpm

(5.7 L/min)

1.5 gpm

(5.7 L/min)

1.5 gpm

(5.7 L/min)

DSP–T13H3 Rev. I

Summary of content (3 pages)

PAGE 1
MultiChoice Universal Pressure Balance Tub and Shower with Diverter Valve for Dual Showers ® Specification: (example) T13H923 R10700-UNWS ROUGH-IN only Concealed in-wall MultiChoice® Universal valve Back-to-back capability, Integral screwdriver stops Heavy Duty forged brass valve body, 1/2" Universal inlets to accept 1/2" copper, 1/2" iron pipe, PEX or CPVC adaptors • 1/2" Male thread inlets/outlets • In-wall diverter valve o • • • • o T13H _ _ _ - _ _ _ FINISH TRIM ONLY: • Pressure balancing cartridge
PAGE 2
MultiChoice Universal Pressure Balance Tub and Shower with Diverter Valve for Dual Showers ® Approvals: • ASME A112.18.1/CSA B125.1 • R10700-UNWS Rough-In with T13H932 Trim Indicates compliance to ICC/ANSI A117.1 • Pressure Balance Valve ASSE 1016 • Handshower back flow protection provided by two integral certified check valves in series, which operate independently, ASME A112.18.3 ( Contact Delta Representative for State and/or Local Approvals.) SIDE VIEW FRONT VIEW 70mm (2.75") ® 117mm (4.
PAGE 3
T13H Series Tub and Shower Add-On Options DESCRIPTION ADD-ON NUMBER – T13H Tub/Shower Add-On Options HOSE A number from the Hose and Slide Bar columns must always be selected, even if it is “0”.