Specification Sheet
Refer to www.specselect.com for individual models. Note: Use this page front and back as a product submittal sheet.
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation.
Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability.
MultiChoice
®
Universal Pressure Balance Tub
and Shower with Diverter Valve for Dual Showers
Page 2.C.8 DSP–T13H3 Rev. I
51mm
(2.0")
OPTIONAL
910mm
(36.0")
(7.0") Ø
178mm
610mm
(24.0")
(32.0")
OPTIONAL
813mm
OPTIONAL
813mm
(32.0")
(3.0")
76mm
229mm
(9.0")
(3.213"- 3.613")
82-92mm
(0.813")
21mm
OUTLET
L
C
(3.0")
76mm
508mm
OPTIONAL
152mm
(6.0")
(2.75")
70mm
910m
m
(36.0")
OPTIONAL
INLET
C
L
(3.0")
(20.0")
SECOND INLET
PLUG FOR
1/2" F. I.P.
(4.75")
121mm
(1.75"-2.50")
44-66mm
(12.0")
OPTIONAL
305mm
INLET
OPTIONAL
(3.0")
76mm
OPTIONAL
76mm
(3.0")
WALL SHOWER
OUTLET
610mm
(24.0")
HAND SHOWER
OUTLET
2 OUTLETS
TO SHOWER
1/2" F. I.P.
INLET/OUTLET
INLET
FRO
AIN
A L E
HOT COLD
INLETS
TO FLOOR
STOPS
ET AL LEER
HANDLE
R10700-UNWS
R10700-UNWS
L
C
A LE OD
(4.6")
117mm
51mm
(2.0")
OPTIONAL
910mm
(36.0")
(7.0") Ø
178mm
610mm
(24.0")
(32.0")
OPTIONAL
813mm
OPTIONAL
813mm
(32.0")
(3.0")
76mm
229mm
(9.0")
(3.213"- 3.613")
82-92mm
(0.813")
21mm
OUTLET
L
C
(3.0")
76mm
508mm
OPTIONAL
152mm
(6.0")
(2.75")
70mm
910mm
(36.0")
OPTIONAL
INLET
C
L
(3.0")
(20.0")
SECOND INLET
PLUG FOR
1/2" F. I.P.
(4.75")
121mm
(1.75"-2.50")
44-66mm
(12.0")
OPTIONAL
305mm
INLET
OPTIONAL
(3.0")
76mm
OPTIONAL
76mm
(3.0")
WALL SHOWER
OUTLET
610mm
(24.0")
HAND SHOWER
OUTLET
2 OUTLETS
TO SHOWER
1/2" F. I.P.
INLET/OUTLET
INLET
FRO
AIN
A L E
HOT COLD
INLETS
TO FLOOR
STOPS
ET AL LEER
HANDLE
R10700-UNWS
R10700-UNWS
L
C
A LE OD
(4.6")
117mm
Approvals:
• ASME A112.18.1/CSA B125.1
•
Indicates compliance to
ICC/ANSI A117.1
• Pressure Balance Valve ASSE 1016
•
Handshower back flow
protection provided by
two integral certified check valves in series, which
operate independently,
ASME A112.18.3
( Contact Delta Representative for State and/or
Local Approvals.)
Note: Measurements may vary ± 6mm (0.25")
P/B VALVE INLETS
:
1/2" Universal inlets accept 1/2" copper,
1/2" Iron pipe, PEX or CPVC adaptors
1/2" Male thread inlets/outlets
DIVERTER VALVE:
1/2" FIP inlets/outlets
FLOW RATE vs PRESSURE
2.5
3
3.5
2
1.5
1
.5
00
0
1
2
3
4
5
6
7
8
9
10 20 30 40 50 60 70 80
10
11
12
13
Shower Outlets
Product Variations
No. 2
No. 3 & 9
Line Pressure (psig)
FLOW
(L/min.)
FLOW
(gpm)
No. 3 & 6
No. 8
FRONT VIEWSIDE VIEW
R10700-UNWS Rough-In
with
T13H932 Trim
FLOW RATE vs PRESSURE
6.5
7
7.5
8
5.5
6
5
4
4.5
3.5
3 11.5
13
20 30 40 50 60 70 80
Line Pressure (psig)
FLOW
(L/min.)
FLOW
(gpm)
14.5
16
17.5
19
20.5
22
23.5
25
26.5
28
29.5
Shower Outlet Flow Rates
Tub Filler Flow Rates
®
NOTE FOR SHOWER #6: Not for use as an anti-ligtature device.
PAUSE WARNING – FOR SHOWER #5
Plumbing Codes require that showerheads and handshowers provide a small but continuous flow
of water (trickle) when in “PAUSE” mode. Because of this continuous flow, in certain circumstances
pressure variations in the water line and/or changes in the position of the shower temperature control
handle while in “PAUSE” mode could result in dramatic changes to the temperature of the water when
the shower head or hand shower is returned to the “ON” position.
ALWAYS point the shower head away from yourself when returning to the “ON” position and feel the
water with your hand before resuming your shower to ensure the water flow is not too hot or too cold.
DO NOT allow children or others who might not understand this warning to use the “PAUSE” function.
DSP–T13H3 Rev. I