Operating Guide

107529 Rev. D

Potential scald or thermal shock injury could result due to cross ow if outlet at the

shower is blocked or restricted (e.g., pause control on hand shower). Be sure to point

hand shower away from you when re-starting ow or install inlet check valves on both

supply lines to prevent possible injury.

Place volume handle (11) onto cartridge.

Seat stop (13) into volume handle, place

adapter (14) into handle and tighten screw

(15). Thread cover (12) onto handle. Place

temperature handle assembly (16) onto

cartridge and drive set screw (17).

C-3

C-4

Install adapter (1) over valve stem (2) and secure it with screw (3).

Install washer (4) onto handle (5), slide handle onto adapter and secure it with screw (6), then

cover set screw with handle button (7).