Installation Guide

ManualsBrandsDelta ManualsBathVero 2-Handle Deck-Mount Roman Tub Faucet Trim Kit Only in Venetian Bronze (Valve Not Included)

1/22/16 Rev. B

SILICONE

T2753 T4753

86645

1/8" (3.17mm)

3/32"

(2.38mm)

www.deltafaucet.com

For easy installation of your Delta

faucet you will need:

• To READ ALL the instructions completely

before beginning.

• To READ ALL warnings, care, and

maintenance information.

• To complete the deck and valve rough-in prior to

installing this trim kit.

TWO HANDLE ROMAN TUB TRIM

LLAVE Y SUS ACCESORIOS PARA BAÑERA

ROMANA DE DOS MANIJAS (MANERALES)

ACCESSOIRES DE FINITION DE ROBINET

À DEUX POIGNÉES POUR BAIN ROMAIN

86645

Write purchased model number here.

Escriba aquí el número del modelo comprado.

Inscrivez le numéro de modèle ici.

You may need/Usted puede necesitar/Articles dont vous pouvez avoir besoin:

Models/Modelos/Modéles

T2753 & T4753

Series/Series/Seria

Para instalación fácil de su llave Delta usted

necesitará:

• LEER TODAS las instrucciones completamente

antes de empezar.

• LEER TODOS los avisos, cuidados, e información

de mantenimiento.

• Para completar el borde y la instalación de válvulas

dentro de las paredes previa a la instalación de la

llave y sus accesorios.

Pour installer votre robinet Delta facilement,

vous devez:

• LIRE TOUTES les instructions avant de débuter;

• LIRE TOUS les avertissements ainsi que toutes les

instructions de nettoyage et d’entretien;

• Installez le corps du robinet et terminez le pourtour

du bain avant de poser les accessories de finition.

Summary of content (8 pages)

PAGE 1
TWO HANDLE ROMAN TUB TRIM 86645 LLAVE Y SUS ACCESORIOS PARA BAÑERA ROMANA DE DOS MANIJAS (MANERALES) ACCESSOIRES DE FINITION DE ROBINET À DEUX POIGNÉES POUR BAIN ROMAIN Models/Modelos/Modéles T2753 & T4753 Series/Series/Seria Write purchased model number here. Escriba aquí el número del modelo comprado. Inscrivez le numéro de modèle ici. T2753 T4753 You may need/Usted puede necesitar/Articles dont vous pouvez avoir besoin: For easy installation of your Delta® faucet you will need: 1/8" (3.
PAGE 2
CLEANING AND CARE Care should be given to the cleaning of this product. Although its finish is extremely durable, it can be damaged by harsh abrasives or polish. To clean, simply wipe gently with a damp cloth and blot dry with a soft towel.
PAGE 3
RP63355▲ Hot Handle Assemblies Montajes manetas calientes Poignées équipées chaudes Model / Modelo / Modèle T2753 RP63358▲ Set Screw & Button Tornillo de Presión y Botón Vis de Calage et Bouton RP63356▲ Cold Handle Assemblies Montajes manetas fríos Poignées équipées à froid RP63367▲ Set Screw (2) Tornillo de Ajuste (2) Vis de Calage (2) RP51022 Stem Extende r (2) Extensión para la espiga (2) Rallonge de tige (2) RP51021 Glide Ring (2) Aro para Deslizar (2) L’anneau de Glissement (2) RP63368 Gasket (2)
PAGE 4
B. A. T4753 1 2 3 RP40668 Diverter Assembly 3 2 4 1 2 4 1 Maintenance B. Model T4753 If faucet does not divert water from the spout to the hand shower, check that the lift rod (1) is securely threaded into the diverter (2). If the problem persists remove the lift rod and spout. Replace the diverter assembly RP40668. A. If faucet leaks from spout outlet: Shut off water supplies – Replace Seats and Springs (1) - RP4993.
PAGE 5
1 T2753 2 T2753 1 3 4 1 3/32" (2.38mm) 2 T4753 T4753 1 1 3 2 3/32" (2.38 mm) 3/32 po 4 2 Assemble spout (1) onto adapter (2) with gasket. Secure spout with set screw (3). Insert button (4) into set screw hole. Note: If surface is uneven, use silicone sealant under the spout. NOTE: The deck and valve rough-in must be finished before installing the trim kit. Model T2753 Unscrew the test cap (1) and discard. Model T4753 Remove set screw (1). Remove and discard test cap (2).
PAGE 6
3 A. T4753 C. 2 T4753 4 2 1 2 B. T4753 B. T4753 2 1 1 4 3 For Model T4753 Only A. Loosen set screw (1), remove finial (2) from lift rod (3) and install C. Install base (1) to nest (2) and tighten. OPTION: Use silicone B. Remove and discard the test cap and gasket (1). NOTE: This is D. Slide hose (1) through conical nut (2). Attach hose (1) tobraidedmetal under the base if deck is uneven. lift rod. Screw the lift rod until it drops down and rotates freely.
PAGE 7
4 T2753 5 8 5/64" (2 mm) 7 5 T2753 6 1 3 1 1 2 4 T4753 T4753 8 7 5/64" (2 mm) 5 1 6 3 2 1 2 2 4 Model T2753 Turn faucet handles (1) all the way on. Turn on hot and cold water supplies and flush water lines for one minute. Important: This flushes away any debris that could cause damage to internal parts. Thread stem extender (1) into valve stem (2). Install gasket (3) onto bonnet nut (4), install glide ring (5) into handle base (6), and place the base over end valve.
PAGE 8
6 A. B. T4753 T4753 1 2 1 3 2 For Models T4753 Only A. Pull hose (1) to its farthest extension and point it down into the B. Attach hand piece (1) to hose (2) with gasket (3) between tub. Pull the lift rod (2) up to the full on position and flush water lines for one minute. After flushing turn off water at the bath valve handles. Return the lift rod to the down position. connection. Refer to maintenance section (page 4) for correct diverter and lift rod function. Sólo para los Modelo T4753 B.