Manualshelf

Installation Guide

ManualsBrandsDelta ManualsPlumbing2-Handle Wall-Mount Valve Trim Kit with 6-Setting Integrated Diverter in Stainless (Valve Not Included)
12345678910
84893 Rev. D
Installation
2
Diverter Cartridge Installation
4
Diverter Bonnet Installation
Slide bonnet nut (1) over diverter sleeve (2) and
thread into rough-in body.
Hand tighten securely.
B.
For Diverter Cartridge Installation:
Apply silicone lube to the o-ring (2) to make
the diverter sleeve (3) easier to install diverter
cartridge.
Rotate the diverter cartridge (1) so the pin is at
the bottom for proper installation.
Apply silicone lube to the o-rings (4) to make
the diverter sleeve (3) easier to install diverter
cartridge.
Align diverter sleeve so that the notches are in
the same position as the notches on rough-in
body (5).
A.
3
1
5
2
1
2
5
4