Installation Guide

ManualsBrandsDelta ManualsBathTesla 2-Handle Deck-Mount Roman Tub Faucet Trim Kit with Handshower in Stainless (Valve Not Included)

1/22/16 Rev. C

Write purchased model number here.

Escriba aquí el número del modelo comprado.

Inscrivez le numéro de modèle ici.

You may need/Usted puede necesitar/Articles dont vous pouvez avoir besoin:

SILICONE

Icons

1/8" (3.17mm)

3/32" (2.38mm)

Models/Modelos/Modéles

T2752 & T4752

Series/Series/Seria

TWO HANDLE ROMAN TUB TRIM

LLAVE Y SUS ACCESORIOS PARA BAÑERA

ROMANA DE DOS MANIJAS (MANERALES)

ACCESSOIRES DE FINITION DE ROBINET

À DEUX POIGNÉES POUR BAIN ROMAIN

78507

1/8" (3.17mm)

3/32"

(2.38mm)

SILICONE

Para instalación fácil de su llave Delta

usted necesitará:

• LEER TODAS las instrucciones completamente

antes de empezar.

• LEER TODOS los avisos, cuidados, e

información de mantenimiento.

• Para completar el borde y la instalación de

válvulas dentro de las paredes previa a la

instalación de la llave y sus accesorios.

For easy installation of your Delta

faucet you will need:

• To READ ALL the instructions completely

before beginning.

• To READ ALL warnings, care, and maintenance

information.

• To complete the deck and valve rough-in prior to

installing this trim kit.

Pour installer votre robinet Delta

facilement, vous devez:

• LIRE TOUTES les instructions avant de débuter;

• LIRE TOUS les avertissements ainsi que toutes

les instructions de nettoyage et d’entretien;

• Installez le corps du robinet et terminez le

pourtour du bain avant de poser les accessories

de finition.

www.deltafaucet.com

T2752 T4752

Summary of content (8 pages)

PAGE 1
TWO HANDLE ROMAN TUB TRIM 78507 LLAVE Y SUS ACCESORIOS PARA BAÑERA ROMANA DE DOS MANIJAS (MANERALES) ACCESSOIRES DE FINITION DE ROBINET À DEUX POIGNÉES POUR BAIN ROMAIN Models/Modelos/Modéles T2752 & T4752 Series/Series/Seria Write purchased model number here. Escriba aquí el número del modelo comprado. Inscrivez le numéro de modèle ici. T2752 T4752 E You may need/Usted puede necesitar/Articles dont vous pouvez avoir besoin: SI LI C O N TE F LON 1/8" (3.17mm) 3/32" (2.
PAGE 2
CLEANING AND CARE Care should be given to the cleaning of this product. Although its finish is extremely durable, it can be damaged by harsh abrasives or polish. To clean, simply wipe gently with a damp cloth and blot dry with a soft towel.
PAGE 3
Model / Modelo / Modèle T2752 Model / Modelo / Modèle T4752 RP78517▲ Spout Assembly Ensamble del Tubo de Salida Bec RP51782 Stream Straightener, Gasket, Wrench Enderezador de Chorro, Empaque y Llave Concentrateur de Jet, Joint et Clé RP78518▲ Handle and Glide Ring Manija y Aro para Deslizar Manette et L’anneau de Glissement RP78520▲ Spout Assembly Ensamble del Tubo de Salida Bec RP78718▲ Button Cover Botón de Cobertura Couvercle de Bouton RP78718▲ Button Cover Botón de Cobertura Couvercle de Bouton
PAGE 4
B. T4752 A. 1 2 RP40668 Diverter Assembly Ensamble del Desviador Dérivation 3 2 3 1 Maintenance B. Model T4752 A. If faucet leaks from spout outlet: Shut off water supplies – If faucet does not divert water from the spout to the hand shower, check that the lift rod (1) is securely threaded into the diverter (2). If the problem persists remove the lift rod and spout. Replace the diverter assembly RP40668. Replace Seats and Springs (1).
PAGE 5
1 2 T2752 T2752 5 8 7 1 1 4 1 6 2 3 T4752 T4752 2 3 1 2 3/32" (2.38 mm) 3/32 po 1 For Models T2752 Only Screw bases (1) with gaskets (2) over end valves (3). Option: Use silicone under the gasket if deck is uneven. Install gasket (4) and spout (5) on the spout adapter (6). Be sure spout is resting firmly on the deck. Install set screw (7) and tighten to secure the spout. Install button (8) into spout. Proceed to step 4.
PAGE 6
3 A. T4752 C. T4752 1 1 2 2 4 3 3 B. T4752 D. T4752 2 4 5 1 1 3 6 2 For Models T4752 Only A. Install lift rod assembly (1) into spout. Remove diverter assembly (2) from spout adapter (3) and thread onto lift rod (1). B. Slide gasket (1) onto spout (2). Install diverter assembly, spout and gasket onto spout adapter (3). Be sure spout is resting firmly on the deck. Install set screw (4) and tighten to secure the spout. Install button (5) into spout.
PAGE 7
4 5 T2752 3 1 3 2 T4752 1 3 4 1 3 2 Models T2752 Remove stream straightener and gasket (1) with wrench (2). Turn faucet handles (2) all the way on. Turn on hot and cold water supplies and flush water lines for one minute. Important: This flushes away any debris that could cause damage to internal parts. Install handles. Be sure glide ring (1) is properly seated in bottom of handle before installing. If either handle does not rotate in the correct direction, do the following: 1.
PAGE 8
6 B. T4752 A. T4752 2 1 3 1 2 For Models T4752 Only A. Pull hose (1) to its farthest extension and point it down into the B. Attach hand piece (1) to hose (2) with gasket (3) between tub. Pull the lift rod (2) up to the full on position and flush water lines for one minute. After flushing turn off water at the bath valve handles. Return the lift rod to the down position. connection. Refer to maintenance section (page 4) for correct diverter and lift rod function. Sólo para los Modelo T4752 B.