Installation Guide

ManualsBrandsDelta ManualsBathCassidy 2-Handle Deck-Mount Roman Tub Faucet with Hand Shower Trim Kit in Polished Nickel (Valve & Handles Not Included)

8/25/14 Rev. A

SILICONE

T2797 T4797

www.deltafaucet.com

86649

1/8" (3.17mm)

3/32"

(2.38mm)

Model/Modelo/Modéle

T2797 & T4797

Series/Series/Seria

Cassidy

TWO HANDLE ROMAN TUB TRIM

LLAVE Y SUS ACCESORIOS PARA BAÑERA

ROMANA DE DOS MANIJAS (MANERALES)

ACCESSOIRES DE FINITION DE ROBINET

À DEUX POIGNÉES POUR BAIN ROMAIN

Write purchased model number here.

Escriba aquí el número del modelo comprado.

Inscrivez le numéro de modèle ici.

You may need/Usted puede necesitar/Articles dont vous pouvez avoir besoin:

For easy installation of your Delta

faucet you will need:

•ToREAD ALL the instructions completely

before beginning.

•ToREAD ALL warnings, care, and

maintenance information.

•Tocompletethedeckandvalverough-inpriorto

installingthistrimkit.

Para instalación fácil de su llave

Delta

usted necesitará:

•LEER TODAS las instrucciones completamente

antes de empezar.

•LEER TODOS los avisos, cuidados, e

información de mantenimiento.

•Paracompletarelbordeylainstalacióndevál-

vulas dentro de las paredes previa a la

instalación de la llave y sus accesorios.

Pour installer votre robinet Delta

facilement, vous devez:

•LIRE TOUTES les instructions avant de déb-

uter;

•LIRE TOUS les avertissements ainsi que toutes

lesinstructionsdenettoyageetd’entretien;

•Installezlecorpsdurobinetetterminezle

pourtour du bain avant de poser les accessories

de finition.

Summary of content (8 pages)

PAGE 1
TWO HANDLE ROMAN TUB TRIM 86649 LLAVE Y SUS ACCESORIOS PARA BAÑERA ROMANA DE DOS MANIJAS (MANERALES) ACCESSOIRES DE FINITION DE ROBINET À DEUX POIGNÉES POUR BAIN ROMAIN Model/Modelo/Modéle T2797 & T4797 Series/Series/Seria CassidyTM T2797 T4797 Write purchased model number here. Escriba aquí el número del modelo comprado. Inscrivez le numéro de modèle ici. You may need/Usted puede necesitar/Articles dont vous pouvez avoir besoin: For easy installation of your Delta® faucet you will need: 1/8" (3.
PAGE 2
CLEANING AND CARE Care should be given to the cleaning of this product. Although its finish is extremely durable, it can be damaged by harsh abrasives or polish. To clean, simply wipe gently with a damp cloth and blot dry with a soft towel.
PAGE 3
Model / Modelo / Modèle T2797 ▲ Specify Finish Especifíque el Acabado Précisez le Fini RP72724▲ Finial Pomo Grain ▲ Specify Finish Especifíque el Acabado Précisez le Fini Model / Modelo / Modèle T4797 RP72719▲ Lift Rod Barra de alzar Tige de Manoeuvre RP73284▲ Set Screw & Button Tornillo de Presión y Botón Vis de Calage et Bouton RP73284▲ Set Screw & Button Tornillo de Presión y Botón Vis de Calage et Bouton RP41896 Glide Ring Aro para Deslizar L’anneau de Glissement RP72723▲ Spou
PAGE 4
A. B. T4797 1 2 3 2 1 2 3 RP40668 Diverter Assembly Ensamble del Desviador Dérivation 1 Maintenance B. Model T4797 If faucet does not divert water from the spout to the hand shower, check that the lift rod (1) is securely threaded into the diverter (2). If the problem persists remove the lift rod and spout. Replace the diverter assembly RP40668. A. If faucet leaks from spout outlet: Shut off water supplies – Replace Seats and Springs (1).
PAGE 5
1 2 T2797 T2797 5 7 8 1 4 1 6 T4797 2 3 T4797 1 2 5 3/32" (2.38 mm) 7 8 4 1 6 NOTE: The deck and valve rough-in must be finished before installing the trim kit. 2 3 Place bases (1) with gaskets (2) over end valves (3). OPTION: Use silicone under the gasket if deck is uneven. Install gasket (4) and spout (5) on the spout adapter (6). Be sure spout is resting firmly on the deck. Install set screw (7) and tighten to secure the spout (5). Insert button (8) into set screw hole.
PAGE 6
3 A. C. T4797 T4797 1 1 3 2 5 4 B. T4797 D. T4797 2 1 5 3 1 4 C. Remove conical nut (1) from handshower nest (2) and insert braid- For Model T4797 Only ed metal hose through the handshower nest. Reassemble test cap (3) to braided hose to hold hose in place. Place handshower nest (2) on mounting piece (4). align in selected direction and tighten by escutcheon (5). OPTION: Use silicone under the base if deck is uneven. A. Install lift rod (1).
PAGE 7
5 4 T2797 1 1 T4797 2 1 1 3 2 2 Install handles and secure with set screw (1). Be sure glide ring (2) is properly seated in bottom of handles before installing. Push in button cover (3) to conceal set screw (1). either handle does not rotate in the correct direction, do the following: 1. Be sure that the end valves are installed correctly (with the hot v alve on the LEFT and both inlet tubes installed AWAY fro m the spo ut). 2.
PAGE 8
6 A. B. T4797 T4797 2 1 1 3 2 For Model T4797 Only B. Attach hand piece (1) to hose (2) with gasket (3) between connection. Refer to maintenance section (page 4) for correct diverter and lift rod function. A. Pull hose (1) to its farthest extension and point it down into the tub. Pull the lift rod (2) up to the full on position and flush water lines for one minute. After flushing turn off water at the bath valve handles. Return the lift rod to the down position. Sólo para los Modelos T4797 B.