Specification Sheet

Mixing Faucets
Deckmount mixing faucet with rigid/swivel spout-2 hole
installation at 2 3/4" centers
Model No: W6700-9
SPECIFICATION:
•
Deckmount mixing faucet for 2 hole installation at 2.75" centers(Maximum 1
1/4" dia. hole size)
•
Field installation of spout as rigid or swivel
•
All brass body with vandal resistant dual shanks to prevent damage to
counter top
•
Assembled shanks
•
Brass locknuts and raised lockwashers to provide positive gripping during
installation
•
Teck Lab compression structures
•
Chrome plated brass renewable seats
•
Deckmount mixing faucet with rigid/swivel spout-2 hole installation at 2 3/4"
centers
•
Chrome Finish
•
Spout: R5 - Gooseneck-6.0" radius-12.0" height(unmounted)-Standard
rigid/swivel field installation unless LS Limited swing option selected-Vandal
resistant .090" wall thickness
•
Outlet#: 9 - w/ 1/4" ID Serrated Nozzle Outlet Plus In-Line Dual Check
Vacuum Breaker(-9 series)
•
Handle#: B - Two Arm Metal
•
Indexed For: CW/HW - Cold & Hot Water(Green & Red)
COMPLIES WITH:
•
CSA approved to CAN/CSA B125 with compliance to ANSI/ASME
A112.18.1M.
•
Meets ADA 5lb. force pressure requirements when 2 3/4" or 4" lever blade
handle is used.
•
In-line Vacuum Breaker tested and certified under ANSI/ASSE Std. 1035
"Laboratory Faucet Vacuum Breakers". Listed by IAPMO. CSA approved to
CAN/CSA B64.1.7
•
Angle Vacuum Breaker tested and approved in conformance with ASSE
Std. 1001 and ANSI A112.1.1 and CSA B64.1.1
•
(Contact Delta Representative for State and/or Local Approvals)
(Dimensional drawing on following page)
•
Not Available
OPERATION:
Delta reserves the right (1) to make changes to specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference.
Measurement may vary plus or minus 6mm(0.25"). Mounting locations are suggested only. Check with local codes for requirements in your area.
- 1.0.16656
Page of1 2
Delta Faucet Company - 55 East 111th St. - Indianapolis, Indiana, USA 46280 - [phone]
Delta Faucet Canada - 395 Matheson Blvd E - Mississauga, Ontario, Canada L4Z 2H2 - [phone]