Specification Sheet
Mixing Faucets
8" center Deckmount mixing faucet with rigid/swivel
spout
Model No: W6740
SPECIFICATION:
•
203mm (8") center deckmount faucet
•
Two Handle
•
Heavy duty cast brass body
•
Metal hold-down package
•
Field installation of spout as rigid or swivel
•
Teck Lab compression structures
•
Chrome plated brass renewable seats
•
Polished chrome plate finish
•
Spout: R6 - Gooseneck spout-6.0" radius-13.5" height(unmounted)-
Standard rigid/swivel field installation unless LS Limited swing option
selected-Vandal resistant .090" wall thickness
•
Outlet: w/ 1/4" ID Serrated Nozzle Outlet(No Dash or -10 series)
•
Handle#: B - Two Arm Metal
•
Indexed For: CW/HW - Cold & Hot Water(Green & Red)
COMPLIES WITH:
•
CSA approved to CAN/CSA B125 with compliance to ANSI/ASME
A112.18.1M.
•
Meets ADA 5lb. force pressure requirements when optional 2 3/4" lever
blade or 4" and 6" blade handles are used.
•
In-line Vacuum Breaker tested and certified under ANSI/ASSE Std. 1035
"Laboratory Faucet Vacuum Breakers".
•
Listed by IAPMO.
•
CSA approved to CAN/CSA B64.1.7
•
Angle Vacuum Breaker tested and approved in conformance with ASSE
Std. 1001 and ANSI A112.1.1 and CSA B64.1.1
•
(Contact Delta Representative for State and/or Local Approvals)
(Dimensional drawing on following page)
•
Not Available
OPERATION:
Delta reserves the right (1) to make changes to specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference.
Measurement may vary plus or minus 6mm(0.25"). Mounting locations are suggested only. Check with local codes for requirements in your area.
- 1.0.16656
Page of1 2
Delta Faucet Company - 55 East 111th St. - Indianapolis, Indiana, USA 46280 - (317) 848-1812
Delta Faucet Canada - 395 Matheson Blvd E - Mississauga, Ontario, Canada L4Z 2H2 - (905) 712-3030