User's Manual

ManualsBrandsDeltacom ManualsElectronicsPager Receiver

User’s Guide Manual

- 1 -

USER’s GUIDE MANUAL

Introduction

Congratulations on your purchase of a Mitsuki Wave Numeric Display

pager.

This User’s guide explains how easy it is to use the Mitsuki Wave pagers.

CONTENT.

1. PAGER LAY OUT

1-1. FUNCTION INDICATORS.

1-2. CONTROLS.

2. OPERATING INTRODUCTIONS.

2-1.POWER ON.

2-2.RECEIVING AND READING MESSAGE.

3. SELECTING FUNCTIONS.

3-1.SETTING THE MODE.

3-2.ERASING THE ALL MESSAGE.

3-3.SETTING THE ALERT MODE.

3-4.TURNING YOUR PAGER OFF.

3-5.SETTING THE CLOCK.

3-6.SETTING THE ALRAM.

3-7.SETTING THE AUTO ON/OFF.

4. THE REST FEATURES.

4-1.CONTINUOUS MESSAGE.

4-2.PROTECTING & UNPROTECTING MESSAGE.

4-3.DELETING INDIVIDUAL MESSAGES.

4-4.DUPLICATE MESSAGES.

4-5.OVERFLOW THE MEMORY.

4-6.OVERFLOW THE PROTECTED MESSAGE.

4-7.BACK LIGHT.

4-8.PRE-PROGRAMMED MESSAGE(CANNED MESSAGE)

5. BATTERY INFORMATION.

5-1.BATTERY BACK-UP.

5-2.REPLACEMENT THE BATTERY.

6. FCC REQUIREMENTS

PAGER LAYOUT.

Chain Ring

Summary of content (10 pages)

PAGE 1
User’s Guide Manual USER’s GUIDE MANUAL Introduction Congratulations on your purchase of a Mitsuki Wave Numeric Display pager. This User’s guide explains how easy it is to use the Mitsuki Wave pagers. CONTENT. 1. PAGER LAYOUT 1-1. FUNCTION INDICATORS. 1-2. CONTROLS. 2. OPERATING INTRODUCTIONS. 2-1.POWER ON. 2-2.RECEIVING AND READING MESSAGE. 3. SELECTING FUNCTIONS. 3-1.SETTING THE MODE. 3-2.ERASING THE ALL MESSAGE. 3-3.SETTING THE ALERT MODE. 3-4.TURNING YOUR PAGER OFF. 3-5.SETTING THE CLOCK. 3-6.
PAGE 2
User’s Guide Manual Mode button 1-1.FUNCTION INDICATORS. SERVICE AREA. LOW BATTERY. ALARM. VIBRATE/ALARM MODE. Select button DUPLICATE MESSAGE PROTECTED MESSAGE. AUTO ON/OFF. CONTINUOUS MESSAGE. 1-2.CONTROLS. *Control Alarm. LEFT BUTTON (MODE) Set Mode. Delete & Lock Selective Message. Turn the back light ON/OFF. Enter the function menu. Return the pager to the standby screen. RIGHT BUTTON *Read Message. (SELECT) Select Function. Control Alarm. Delay to return the Standby Screen. 2.
PAGE 3
User’s Guide Manual 2-2.RECEIVING AND READING MESSAGE. Your FLEX pager can receive up to sixteen 20 character messages. When a message is received the pager alerts for eight seconds. Press the done button to display the message and the time the message was received. Press the Select button to display the second screen. The first screen of your message displays the message slot number and time received.
PAGE 4
User’s Guide Manual delete beep. 3-3.SETTING ALERT MODE. Press the Mode button for two seconds to Enter the “MELODY SET?” mode. If you press the Select button for two Seconds, ”MELODY[01]”is displayed With the melody. Whenever you press the Select button, The alert menu is increased up to “MELODY [15]” scrolling and vibration by turns. When you press the Mode button to select Alert menu, It is returned to the standby Screen automatically. ▼ ▼ 3-4.TURNING YOUR PAGER OFF.
PAGE 5
User’s Guide Manual ▼ press the Select button for two seconds and it is displayed ❝(00-01-01)❞ The year blinks. If you press the Select button, you can change the year. If you press the Select button for two Seconds, the month is blinks. Press the Select button to change the Month. The way to change the day is the Same. After you set the date, press the Select button for two seconds to set the day of the week and time. The day blinks. If you press the Select button, you can change the day.
PAGE 6
User’s Guide Manual 3-6.SETTING THE ALARM Press the Mode button for two seconds to enter The mode. Press the Select button three times to enter The “ALARM SET?” mode. ▼ If you press the Select button for two seconds, you can enter” ALARM(ON)/(OFF)” mode. ▼ You can change (ON)/(OFF) by pressing the Select button. If you select ”ALARM (OFF)”, it is returned to the standby screen by pressing either Mode button shortly or Select button for two seconds.
PAGE 7
User’s Guide Manual Is same with setting the clock. When it is set “AUTO (ON)”. auto ON is operated in spite of power OFF mode. 4. THE REST FEATURES 4-1. CONTINUOUS MESSAGE Message longer then 12 characters display on screen, indicated by the ( )Icon. It is displayed up to 31 cgaracters. 4-2. PROTECTING & UNPROTECTING MESSAGES You can protect up to 10 messages so they are not erased or replaced by new messages. The message you want to protect/unprotect must be disPlated on the screen.
PAGE 8
User’s Guide Manual Press the Select button and it is displayed “UNLOCKED.”The Protect( )icon is no longer displayed. 4-3. DELETING INDIVIDUAL MESSAGES Press the Select button twice while the message is displayed and “DELETE?” is displayed. Press the Select button to delete a message. All remaining messages are moved to the next available message slots. 4-4. DUPLCATE MESSAGE If the same message is received more than once, the ( ) Icon is displayed when receiving your latest message.
PAGE 9
User’s Guide Manual 4-6. OVERFLOW THE PROTECTED MESSAGE Your pager can store up to 10 protected messages. If you Intend to protect more massages than its available memory. The pager displays “LOCK FULL.” 4-7. BACK LIGHT Press Mode button to tum the back light ON. Press Mode button again to tum the back light OFF. The back light tum off automatically eight seconds after retuming to the standby screen 4-8.
PAGE 10
User’s Guide Manual 1115: 1116: 1117: 1118: 1119: Happy mother’s day Happy father’s day Congratulation Call me sweet heart Come home early 5.BATTERY INFORMATION The FLEX pager operates with one AAA-size alkaline battery. When the battery is low, the user will be alerted by tome and Low battery( )icon display on the standby screen. (The Alert tone and icon will disappear only when a mew battery is Replaced) 5-1.