Operation Manual

User’s Guide Manual
- 3 -
message is not read, the pager gives a remainder alert every two minutes and the screen
displays the number of unread messages (i.e. 1 memos, 2 memos) until all messages are read.
If the pager receives more messages than its available memory can hold, the new message
replaces the oldest read, unlocked message. An overflow condition occurs when all message
slots are filled with unread message, while the pager is in the overflow condition, the oldest
unread message is discarded.
At this time, the pager displays “MEMO FULL”. Message must be read and erase to clear the
overflow condition.
8. Turning the Back Light on/off
1) Press Mode button to turn the back light on.
2) Press Mode button again to turn the back light off.
The back-light turn off automatically eight seconds after returning to the standby screen.
9. Changing Alert mode
1) Press Mode button for two seconds to enter the function menu.
2) Press Select button to scroll the function menu.
3) If “SOUND?” is displayed, press Select button for two seconds.
4) Press Select button to select alert menu SOUND1, SOUND2, SOUND3, SOUND4, SOUND5,
SOUND6, SOUND7, SOUND OFF.
10.Setting the Time
1) Press Mode button for two seconds to enter the function menu.