User Manual
Table Of Contents
- System Part Number Explanation
- 1 Introduction
- 2 System Description
- 2.1 Master Unit
- 2.2 Remote Unit
- 3 System design
- 4 Installation guidelines
- 5 Commissioning
- 6 RF Commissioning
DELTANODE FIBER DAS MANUAL
©DeltaNode Solutions 2012
45
Revision 12-03
We wanted -10 dB so we have 9,3 dB too low gain. We should then increase the gain and the best place
to do this would be in the remote unit by setting the gain at 35 + 9,3 = 44,3 which we will round to 44 dB.
That uplink is now finished and we will repeat the settings for all of our uplinks, one at a time.