User Manual

UPPER PULLEY ASSEMBLY INSTALLATION

REMOVE THE M10 NUTS (BB), AND M10 WASHERS (AA) THAT HOLD THE UPPER PULLEY FRAME

ASSEMBLY TO THE BODY.

INSTALL THE UPPER PULLEY ASSEMBLY (E) TO THE LAT ATTACHMENT USING M10 x 70MM

BOLTS (X), M10 WASHERS (BB), AND M10 LOCKNUTS (CC).

ATTACH THE UPPER PULLEY ASSEMBLY (E) TO THE CHROME RODS USING 3/8” x 1” BOLTS

(AA).