Datasheet

6.7
8.3
1.6
12.7
20 30.9 MAX
24.5 MIN
5.08
22
DIMENSIONS
PANEL CUT-OUT
WASHER
CAP
CONTACT
INSERT
BUSH
INSULATING
BUSH
LOCKNUT
4 BA
BUSH
INSULATING
TAG
SOLDER
4BA THREAD
MATERIAL:
CAP :ACETAL
THREAD CONTACT :BRASS, BRIGHT NICKEL PLATE
INSERT :BRASS,BRIGHT NICKEL PLATE
BUSH :BRASS BRIGHT NICKEL PLATE
INSULATING BUSHES :ACETAL
LOCKNUT :BRASS, BRIGHT NICKEL PLATE
WASHER :BRASS, BRIGHT NICKEL PLATE
SOLDER TAG :BRASS, FLASH SILVER PLATE
ELECTRICAL:
CURRENT RATING :16 AMPS
RATED VOLTAGE : 50 V
MECHANICAL:
RECOMMENDED TORQUE : MIN 0.5 nM - MAX 1.0 Nm
THREAD :4BA (3.6mm OR 0.141inch)
PANEL THICKNESS : 12.7mm (MAX)
INSULATED BINDING POST WITH A 4mm SOCKET.
PANEL INSULATING BUSHES WITH A LOCATION KEYWAY,
THREADED TERMINATION SUPPLIED WITH SOLDER TAG WASHER
AND LOCK NUTS.
AVAILABLE IN 7 COLOUR VARIATIONS
COLOUR PART NUMBER
BLACK 552-0100
BLUE 552-0200
BROWN 552-0300
GREEN 552-0400
RED 552-0500
WHITE 552-0600
YELLOW 552-0700
TITLE
552 SERIES
AUTHOR
Shaun Barron
THIRD ANGLE PROJECTION
SCALE 1:1
A4
SHEET 1 OF 1
SEE NOTE
SEE NOTE
MATERIAL
FINISH
IF IN DOUBT ASK! DO NOT SCALE DRAWING!
PROPRIETARY AND CONFIDENTIAL:
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE
PROPERTY OF ALPHA 3 MANUFACTURING .
ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE
WRITTEN PERMISSION OF ALPHA 3 MANUFACTURING
IS PROHIBITED.
DEM Manufacturing is a division of Alpha 3 Manufacturing LTD
DEM Manufacturing, Deltron Emcon House, Hargreaves Way,
Sawcliffe Ind. Park, Scunthorpe, North Lincolnshire, DN15 8RF, UK
D
E
C
BB
C
D
E
WC
[phone] www.dem-uk.com
THE FINISHED PRODUCT SHOULD BE CLEAN AND FREE FROM ALL
LIQUIDS AND DEBRIS. SURFACES SHOULD BE OF UNIFORM
APPEARANCE FREE FROM SHARP EDGES, BURRS AND CORROSION
GENERAL SPECIFICATION
PART
VERSION ISSUE/REV.
FILE
21
APPROVER
RELEASED
552-0x00
008
EDIT DATE
EDITOR
DT
15 Mar 2018
A
3
7
5
2
6
4
1
A
REV
DATE
ECN NUMBER
ECR COMMENT
008
15 Mar 2018
C03732
ADD TORQUE SETTING MIN 0.5 nM- 1nM MAX
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN MILLIMETRES
LINEAR & RADIAL TOLERANCE:
NO DECIMAL PLACES
0.2mm
1 DECIMAL PLACE
0.1mm
2 DECIMAL PLACES
0.05mm
ANGULAR TOLERANCE:
1