User's Manual

MacOSX installation

• Each DVD contains an installer speciﬁ c to the contents of that DVD. Please

follow these steps for each DVD after inserting it in your drive:

1. Open the DVD contents and double-click BFD Deluxe Mac Setup.pkg.

2. Follow the on-screen instructions until you are asked to select a destination.

3. Select the destination drive (the drive on which your BFD folder resides) and

click Choose to select the BFD folder. Click Continue when you’ve speciﬁ ed

the correct folder.

4. Click Install to proceed to next step.

5. Select a detail level and click Next. BFD Deluxe Collection can be installed

with one of three detail levels, determining the maximum amount of velocity

layers that are installed for each Kit-Piece on the DVD.

This also dictates the amount of hard disk space required.

Higher detail levels have a higher impact on system resources.

Small: a maximum of 32 velocity layers will be installed

Medium: a maximum of 64 velocity layers will be installed

Deluxe: a maximum of 128 velocity layers will be installed

6. Enter your BFD Deluxe Collection serial / license number (located on the

inside front cover of the digipak containing the DVDs) and click Install.

You will only need to enter your serial for the ﬁ rst DVD you install.

Installation of BFD Deluxe Collection can take several hours, as a large

amount of data needs to be installed, so please be patient.

To register your copy of BFD Deluxe Collection, or If you experience any

problems during the installation, please consult our support page: