Delvcam DELV‐8LCD‐SDI 1RU Rackmount 8‐LCD 3G‐SDI Video Monitor
IMPORTANT SAFETY INSTRUCTIONS Read manual before using this product. Keep manual for future reference. Do not place the display screen on the ground. Avoid heavy impact or dropping. Do NOT use chemical soluƟons to clean this product. Wipe with a clean soŌ cloth to maintain the brightness of the surface. Do not block any vent holes. Follow the instrucƟons when making adjustments.
SPECIFICATIONS Display Screen: 2 inch LCD, LED backlight Resolution: supports up to 1920x1080 , 640 x 240 native resolution Brightness: 250cd/m² Aspect Ratio: Contrast Viewing Angle: 4:3 300:1 80°/ 70°(H/V) Input Signal: 3G-SDI Output Signal: 3G-SDI Remote Control: RS422 HDMI Formats: Full HD-HD 1080p, 1080i, 720p, 576p, 576i, 480p, 486i SDI Formats: SMPTE-125M 480i(59.94),1080i(60/59.94/50)1080p (30/29.97/25/24/24sF/23.98/23.98sF (60/59.94/50/30/29.97/25/24/23.
FRONT Time Code Audio Level Meter REAR 1 2 3 4 1 Power Off/On 2 15VDC Power Jack 3 RS422 Input for Computer Interface 4 SDI Output 5 SDI Input 6 DIP Switches: Up = ON 5 6 1 Time Code—Controls monitors to the left of Switch 2 Audio Level Meter —Controls monitors to the left of Switch 3 Time Code—Controls monitors to the right of Switch 4 Audio Level Meter—Controls monitors to the right of Switch Delvcam DELV‐8LCD‐SDI Page 4
Time Code*: Switches 1&3 Audio Level Meter: Switches 2&4 * Timecodes are preconfigured for LTC. If you need to change to VITC, use the computer interface. SOFTWARE INTERFACE OPERATION 1. 2. 3. 4. 5. In COM Seƫngs, select the hardware connecƟon and click OPEN to open the serial port. Choose a monitor under Select Monitor. Select one or all. Set funcƟons: Brightness, Contrast, Time Code, Level Meter, and UMD. UMD Data: Enter no more than 32 characters. Click Data Send to display the characters.
TROUBLE SHOOTING No Image - Ensure that the cables are properly connected. - Use the standard power adapter that is included as improper voltage input may cause damage or injury.
