Delvcam DELV-WFORM-7 User Guide
IMPORTANT SAFETY INSTRUCTIONS: Please read manual before using this product. Please keep manual for future reference. Please read the cautions to prevent possible danger and loss of property. Please enjoy the benefits of convenience, safety, and space-saving from this TFT LCD monitor in different ways.
Contents PRODUCT DESCRIPTION --------------------- 3 INSTALLATION OF SUNSHADE COVER AND BATTERY PLATE---------------------------5 DV BATTERY MOUNT PLATE---------------- 6 WIRING INSTRUCTIONS-----------------------7 SETTING MENU ---------------------------------- 8 ACCESSORIES ------------------------------------11 PARAMETER --------------------------------------12 TROUBLESHOOTING --------------------------12 * Advanced functions are only available for product model with"/P2"&"/S2"..
PRODUCT DESCRIPTION 1．TALLY (indicator light). 2．Earphone jack. 3．Power indicator light: ON/OFF (Light turns to red when power on). 4．VIDEO: Indicator lights up when signal switch to video state. 5．YPbPr: Indicator lights up when signal switch to YPbPr state. 6．HDMI: Indicator lights up when signal switch to HDMI state. 7．SDI: Indicator lights up when signal switch to SDI state (optional). 8．F1、F2、F3、F4:User-definable buttons.
10．Knob SAT: Press the knob to select main MENU options; rotate knob to confirm the selection and adjust parameter values. Default as Saturation function. 11．Knob TINT: Default as Tint function. 12．Knob CONT: Default as Contrast function. 1. Battery power on/off switch: “ǁ” is battery power; “O” is power off; “|” is DC power. 2. Battery pinch slots. 3. SDI signal input / output interface (optional). 4. YPbPr signal input interface. 5. Audio signal input. 6. Audio (L/R) input. 7.
INSTALLATION OF SUNSHADE COVER AND BATTERY PLATE Installation of sunshade cover: ① As shown, buckle the sunshade cover on the device. ② As shown, cover buttoned into the appropriate slot, and fastened in accordance with the order of the both sides. ③ As shown, bend sunshade panel to meet and paste with sunshade cover interlocking. ④ Installation completed. * Advanced functions are only available for product model with"/P2"&"/S2"..
DV BATTERY MOUNT PLATE: Standard mounts process Following three types of battery plates are suitable for this device, model F970, QM91D, DU21 & LP-E6 (choose 2 out of 4). MODEL: F-970 MODEL: QM91D MODEL: DU21 MODEL: LP-E6 DV Battery Mount Plate: DV Battery Mount Plate Specification: Model DU21 for battery of Panasonic DV: NV-GS/PV-GS/DZ-MV/GS/H28/H258/H288GK series, comply with Panasonic battery DU06/VBD140/SANYO DZhs301sw/Hitachi DZ-HS303SW/BZ-BP14S/DZ3200/BP07W.
V-mount battery plate (optional): Please refer to GP-L130AB type battery specifications. V-mount Battery Plate Adaptor Panel Anton Bauer mount battery plate (optional): Please refer to GP-L130B type battery specifications. Anton Bauer Mount Battery Plate Adaptor Panel WIRING INSTRUCTIONS Power & TALLY cable 1. 2. 3. 4. 5. 6. XLR (M) connector: to connect the XLR connector on device. DC Power adapter connector. Red: for TALLY red light connector. Green: for TALLY green light connector.
SETTING MENU Before setting the functions, please make sure the device is connected correctly. When power on, press BRI/MENU knob on the device, function menus will pop-up on the screen. After confirm the option value, then press BRI/MENU knob to return to the previous, and press the BRI/MENU knob again to exit the menu settings. BRI / MENU knob: to select an option. SAT knob to select the main menu, adjusting option values and confirm the selection.
ITEMS Center Marker Aspect Marker Screen Markers Marker Color Marker Mat Thickness OPTIONS ON/OFF OFF, 16:9, 4:3, 14:9, 13:9,15:9,1.85:1, 2.
Function of buttons and knobs can be customized by users’ needs. Functions of F1-F4 buttons can also be customized: Center Marker, Screen Marker, Check Field, Color Bar, Camera, PIP, Image Flip, Zoom, Pixel-to-Pixel, Freeze Input, Underscan, H/V delay * Peaking, False Color, Exposure, Histogram, Level Meter and Wave/Vector. Functions of R1-R4 buttons can also be customized: Contrast, Brightness, Saturation, Tint, Volume, Sharpness and Back Light. F1-F4 or R1-R4 shortcut key steps: 1.
ACCESSORIES: Standard Accessories: 1. Sun Shade Cover 1 Piece 2. Gimbal bracket 1 Piece 3. Battery Plate (F-970/QM91D/DU21/LP-E6) 2 Pieces (Choose 2 out of 4) 4. HDMI A/C cable 1 Piece 5. Power & TALLY cable 1 Piece 6. Shoe Mount (for camera only) 1 Piece 7. 12V DC adapter 1 Piece 8. Suitcase 1 Piece 9. Adaptor Panel 1 Piece 10. Manual 1 Copy Optional Accessories 1. Anton Bauer Mount Battery Plate 2. V-mount Battery Plate 3.
PARAMETERS: Panel Size 7’’ LED backlit Resolution 1280×800 Brightness 400cd/㎡ Contrast 800:1 Viewing Angle 178°/ 178°(H/V) Input Voltage DC12V (XLR DC Connection) Input Signal HDMI, YPbPr, AV and 3G-SDI(optional), Current 900mA Power Consumption ≤11W Size:(LWD) 191.5×152×31mm/141mm (with cover) Weight 760g / 938g (with cover) / 2160g (with suitcase) TROUBLE SHOOTING 1. Only black-and-white display: Check whether the color saturation is properly setup. 2.
* Advanced functions are only available for product model with"/P2"&"/S2"..
