MECHANICAL WINDOW AIR CONDITIONER USER MANUAL FOR MODELS: 1DMC5K Before using your air conditioner, please read this manual carefully and keep it for future reference, along with your receipt. Specifications and performance data is subject to change without notice.
CONSUMER PRODUCT INFORMATION For your own records, please attach a copy of your sales receipt to this manual and complete the following: Model Number: _____________________________________ Serial Number: _______________________________________ Purchase Date: ____________________________________ Store Purchased: _____________________________________ Installation Date: ___________________________________ Installation Co.
TABLE OF CONTENTS INTRODUCTION TO REFRIGERANTS R32 .................................................................. 1 IMPORTANT SAFETY INSTRUCTION ........................................................................ 2 ELECTRICAL REQUIREMENTS ................................................................................... 3 ... ........... ................................................ INSTALLATION & ASSEMBLY INSTRUCTIONS ...........................................................
INTRODUCTION TO REFRIGERANTS R32 The refrigerants used for air conditioners are environmentally friendly hydrocarbons R32. This kind of erant is combustible and odorless. Moreover, it can burn and explode under certain condition. However, there will be no risk of burning and explosion if you comply with the following table to install your air conditioner in a room with an appropriate area and use it correctly.
• Plug into a grounded 3 prong outlet. • Do Not remove the ground prong. • Do Not use a plug adapter. • Do Not use an extension cord. • Unplug the air conditioner before servicing. • Use two or more people to move and install the air conditioner. FCC Caution. This device complies with part 15 of the FCC Rules.
Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do Not remove the ground prong. Do Not use an adapter. Do Not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock.
INSTALLATION HARDWARE INCLUDED QTY.
FIG.
5 (It is suggested to keep a downward angle so accumulated rain water can drain out from the backside of the unit.
FIG. 13 4 Place the frame lock between the extended accordion panels and the window sill as shown in FIG. 9. Screw a 3/4" (19 mm) locking screw through the frame lock and into the window sill (FIG. 10). FIG. 9 FIG. 10 FIG. 14 FIG. 11 FIG. 12 .
INSTALLATION & ASSEMBLY INSTRUCTIONS Introduction to Refrigerants R32 Before installing the appliance, you must read the manual carefully to get the safety information and notes. When filling the combustible refrigerant, any of your rude operations may cause serious injury or injuries to human body or bodies and object or objects. A leak test must be done after the installation is completed.
INSTALLATION & ASSEMBLY INSTRUCTIONS Introduction to Refrigerants R32 1. Site Safety Open Flames Prohibited Ventilation Necessary 2. Operation Safety Open Flames Prohibited Mind Static Electricity Must Wear Protective Clothing and anti-static gloves Don't use mobile phone 3. Installation Safety Refrigerant Leak Detector Appropriate Installation Location The left picture is the schematic diagram of a refrigerant leak detector. Please note that: 1.
USING YOUR AIR CONDITIONER OPERATING YOUR AIR CONDITIONER 1. POWER: TURN ON THE UNIT BY ROTATING THE MODE DIAL TO THE DESITED SETTING. 2. COOLING MODE: FOR MAXIMUM COOLING SET THE MODE DIAL TO "LARGE SNOW FLAKE". IN HGH COOL MODE, THE FAN WILL AUTOMATICALLY GO TO HIGH. THIS WILL HELP CIRCULATE THE COOL AIR THROUGHOUT THE ROOM. THE FAN WILL OPERATE ON LOW IN "SMALL SNOW FLAKE" MODE. 3. FAN MODE: FOR FAN ONLY MODES, CHOOSE EITHER OF THE "FAN" OPTIONS.
CARE AND MAINTENANCE Clean your air conditioner to keep it looking new and to minimize dust build up. Make sure the unit is off and unplugged prior to any care or maintenance. 15 FIG.
Turn the temperature knob to a higher setting See "The Air Conditioner is Freezing Up" below Set the mode knob to HI FAN or HI COOL and set the temperature dial to 1 or 2.
NOTE A highly recommended troubleshoot for any issue in general consists of turning off unit and unplugging for 5 minutes. It is also recommended to try another wall outlet. For further assistance, contact Consumer Services at 888-433-6254 or 888-4DENALI.
DENALI AIRE | 5401 DANSHER RD., COUNTRYSIDE, IL 60525 | 888-433-6254 | DENALI-AIRE.COM | SUPPORT@DENALI-AIRE.