User's Manual

Denecke JB-1 User's Manual
©2018 Denecke, Inc.
DENECKE, INC.
25209 Avenue Tibbitts * Valencia, CA 91355 * [phone]
www.denecke.com * email: [e-mail]
9
Reprogram Menu
If needed, scroll (Click) to REPROGRAM and select (Click & Hold 1 second):
R
E
P
R
O
G
R
A
M
Choices are Return to Factory Default and Reprogram Via USB:
F
A
C
T
O
R
Y
D
E
F
A
U
L
T
S
T
A
R
T
U
S
B
C
A
N
C
E
L
To set the JB-1 to its Factory Default settings, removing User-selected settings, select Factory Default. Factory Default Settings
are shown in a table at the end of this manual.
From time to time, Denecke may make software updates available, for added features,
bug corrections, and improvements, as needed. To determine if your JB-1 needs an update, compare the Software Version
shown in the About Menu below to that shown on the Denecke website, http://www.denecke.com/, which will also provide
update details.
To update Software:
1. The JB-1 can be updated from either a Mac or Windows computer. The Denecke Firmware Update Utility can be
downloaded from http://www.denecke.com/ .
2. On your computer, go to http://www.denecke.com/ to download the latest JB-1 Software Version.
3. On the JB-1, select START USB
4. Connect a USB cable between the JB-1's Micro USB connector and a computer.
5. On the computer, start the Denecke Firmware Update Utility, select the latest JB-1 software version, and select
UPDATE.
NOTE: Do not disconnect the USB cable from the JB-1 nor computer until the update is complete, to avoid having to
send the unit back for repair.
6. The computer will indicate when update is complete.
ABOUT MENU
To determine the version, serial number, etc., scroll (Click) to ABOUT, and select (Click & Hold 1 second):
A
B
O
U
T
Information shown is:
M
O
D
E
L
:
J
B
-
1
H
W
V
E
R
:
x
.
x
S
W
V
E
R
:
x
.
x
S
N
:
n
n
n
n
W
W
W
.
D
E
N
E
C
K
E
.
C
O
M
As discussed in the Reprogram section, the S/W Version can be compared to the latest on the Denecke website, to determine if
an update is needed.