User's Manual

Denecke JB-1 User's Manual
©2018 Denecke, Inc.
DENECKE, INC.
25209 Avenue Tibbitts * Valencia, CA 91355 * [phone]
www.denecke.com * email: [e-mail]
4
Push Button
Control of the JB-1 is achieved through a simple push button.
To turn on the unit, press the button in.
Click the push button to turn on the backlight.
At the top (main) level:
• Hold push button 2 seconds to unlock the main menu.
• Click the button to show the main menu (when menu unlocked).
In a menu:
• Click to scroll through menu items.
• Click & Hold 1 second to select the desired menu item.
LED
Indicates battery and sync/internal run status.
When the LED is off, the syncbox is not generating timecode. Note: LED
is illuminated for one second at power-up.
The LED (green) indicates when the JB-1 is generating timecode. The
LED flashes once per second (at the start of the frame 00).
1/second
Two flashes per second indicates battery low.
2/sec., double blink rate
Three flashes per second indicates battery dead. The internal battery
should be recharged as soon as possible when dead battery is indicated.
3/sec., triple blink rate