Use and Care Guide

®
2
MAX position, to set the temperature. (The outer
burners are 750 watts and the middle burner is 300
watts) The specific burner indicator light will illuminate
to show that the unit is heating up. (MIN is low heat,
MAX is high heat)
CAUTION: The metal surfaces will become hot. Do not touch
while in use.
Note: When using the burner for the first time, there may
be a smell of smoke coming from the surface of the heating
elements. This is normal, due to the invisible protective
coating during production.
3. When you are finished using the burner, turn the dials to
the OFF position and unplug the power cord. Allow the
unit to cool before moving or cleaning.
MAINTENANCE AND CARE
1. Be sure the unit is unplugged from the wall and is cool
before cleaning.
2. Do not immerse the unit in water to clean.
3. Use a damp soapy cloth or sponge to clean the unit.
Do not use harsh abrasives or metal scrubbing pads to
clean the unit.
4. Store the burner in a clean dry place.
HINTS AND TIPS
n Do not use unstable pans. Be sure to use flat bottom
pans to insure full contact with the heating surface for
maximum heat efficiency.
FEATURES
BEFORE FIRST USE
1. Clean the burner with a soft damp cloth. Place the
burner on a flat, level surface near an electrical outlet.
2. Be sure the unit is in the OFF position before plugging
in.
3. Always use flat bottom cookware that makes close
contact with the heating element. Ideally, the cookware
should be 7”- 8” in diameter. Keep the surface of the
heating element clean and dry.
HOW TO OPERATE
1. Put water and/or food in the cookware. Do not fill more
then 80% of the cookware, as it will overflow. Cover and
place on the burner.
2. Plug the unit in. The power indicator light will illuminate.
Turn the dial for the desired burner from the MIN to
Heating Surfaces
(750 watts, 300 watts, 750 watts)
Temperature/Power Control Knobs
Power Indicator Light
Heating
Indicator
Lights