- Keystone Manufacturing Co, Inc. Blender Use and Care Instructions

3
B l e n d–n–G r i n d
™
OPERATING THE BLENDER
1. Be sure motor base is unplugged.
2. Place blender attachment on the motor base.
3. Fill the blender attachment with desired ingredients.
4. Place the lid on the blender with the EZ Add™
opening cover in place.
5. Plug in motor base.
6. Hold down the on/off switch to start blending.
7. Release the on/off switch to stop blending.
8. Unplug the motor base before emptying blender.
OPERATING THE GRINDER
1. Be sure motor base is unplugged.
2. Fill the motor base with items to grind (coffee beans,
nuts,etc.). About
1
/4 cup.
3. Place grinder lid on motor base.
4. Plug in motor base.
5. Hold down the on/off switch to start grinding.
6. Release the on/off switch to stop grinding.
7. Unplug the motor base to empty grinder.
HOW TO CLEAN THE BLENDER
1. Remove the plug from the wall socket.
2. Remove the blender attachment, lid and opening cover from
the motor base and wash with warm soapy water.
3. You can clean the motor base with a damp cloth. DO NOT
IMMERSE IN WATER!
HOW TO CLEAN THE GRINDER
1. Remove the plug from the wall socket.
2. Clean the motor base with a damp cloth. DO NOT IMMERSE
IN WATER!
3. Clean grinder lid with warm soapy water and rinse
thoroughly.