Specifications

Master Page
Call [phone] 24 hours
Saw Tools & Repair
96 Call [phone] 24 hours
Price is for either #242
or #271. Please specify
which type you want
when ordering.
LOCTITE is a pro saw user’s friend. It will reduce
down time more than anything else we sell. We
use both types in our shop.
LOCTITE #242 THREAD LOCKER:
• helps hold screws which attach shrouds
• is good for holding delicate screws
• is best if you plan to disassemble at a later date
LOCTITE #271 STUD & BEARING MOUNT :
• helps hold main bearings to case mounts
• helps hold bar studs & dawg bolts in place
• should be used when installing TIME-SERTS
Tip: When disassembling a component that was
assembled with #271 heat the fasteners to release
the bond.
List 11
95
MADSEN’S
1-9 8
95
10+ 8
50
Size X For For Component MADSEN’S PRICE
Thread Pitch Saws Repair Kit Price Inserts
We repair stripped threads in our shop with TIME-SERTs.
We prefer them over other thread repair systems because
they are a solid bushing thread insert. Their thin-walls have
synchronized internal-external threads and make an excel-
lent repair.
They are also easy to install and lock into place.
Each kit contains a drill, counterbore, cutting tap, & insert
driver. When ordering a kit, please also order inserts.
Thread Repair Kit
4mm X .8 STIHL oil pump & ignition screws 64
30
1
05
ea
5mm X .8 STIHL most buffers & housing screws 57
40
1
05
ea
HUSKY most housing screws
6mm X 1 STIHL buffer mounts, cylinder bolts 53
90
1
05
ea
8mm X 1.25 STIHL small block bar studs on most models 57
40
1
05
ea
14mm X 1.25 STIHL spark plug 114
65
2
10
ea
Faller's Dawgs
FALLER'S DAWGS are laser cut from heat treated
alloy steel. They are designed to be used in
matching pairs. Their large tooth design works
great for gripping deep or rough bark. The point
positions are also designed to maximize leverages
with long cutting attachments.
Pictured left: This dawg is
the outside dawg for a
HUSQVARNA 395. It fits
on the outside of the bar
cover and is mounted on
the bar studs like the fac-
tory dawgs. The inboard
dawg mounts on the main
case on the factory mount-
ing points.
We carry them for current models of STIHL and
HUSQVARNA falling saws. Most dawgs are
under $12 each. Please specify what model saw
you are fitting when ordering.