User manual

Before First Use

1. Remove all packing materials and literature.

2. Wash all removable parts in warm soapy water. Rinse

and dry all parts thoroughly. Wipe the water reservoir

with a clean damp cloth. NEVER immerse the water

reservoir in water or any other liquid. NEVER clean any

parts in a dishwasher.

How To Assemble

1. Make sure the unit is unplugged before assembling.

2. Place the base on a flat, level surface.

3. Position the turbo ring around the

heating element.

4. Fill the water reservoir with cold or

warm water to the max level. Use fresh

water with each use.

5. Position the drip tray over the water

reservoir. Whenever possible, use the

retained liquid in the drip tray for

making gravies, sauces, soups, etc.

6. Position the steaming baskets.

a) Place the food in the steaming baskets.

b) The baskets are labeled 1,2, and 3

for easy positioning.

c) Position basket 1 on the lower level,

2 on the middle level, and 3 on the

top level.

How To Operate

To set the digital clock:

1. Plug the steamer into a wall outlet. The display will

read 00:00.

2. Press the “Program” and On/Off buttons at the same

time. A beep will sound.

3. Increase or decrease the time by pressing the +/-

button. Note: the time will increase in 10 minute

intervals and decrease in 1 minute intervals.

Immediate Steam Mode:

1. Push the On/Off button until the display shows 45.

2. Set the steaming time by pressing the +/- buttons. The

time will change in 5 minute intervals. Press any button

to stop the procedure.

3. After the steaming time is set, the unit will sound for 2