User manual

seconds and the red indicator light will illuminate. The

clock will begin to count down.

4. When setting the time to 0, the electric timer will return

to the clock mode automatically. The maximum steaming

time is 90 minutes.

5. When steaming, press the +/- button to change the set

time. Press the On/Off to stop the steam process. The

display will return back to clock mode.

Timing The Steam Mode:

1. Press the “Program” button. “Prog” will appear on the

upper left of the display.

2. Set the time by pressing the +/- button. The time will

increase and decrease in 10 minute intervals.

3. Press the “Program” button until the display shows 45.

Press the +/- button to adjust the steaming time.

4. Press the “Program” button again. The display will show

the time and “Prog”. This indicates the start of the timing

steam mode.

5. When the start time is reached, the unit will sound, the

red indictor light will illuminate and the steamer will

begin to steam.

6. If you want to cancel the timing steam mode, press the

“Program” button. This will return the unit back to the

clock mode.

At the end of steaming:

1. The steamer will automatically go into a hold mode after

the steaming time is finished.

2. The display will show the time and a holding symbol in

the lower left corner. The green indicator light will

illuminate.

3. The hold mode will warm for 2 minutes every 8 minutes,

after the unit stops steaming.

4. To cancel the hold mode, press the On/Off button. The

display will return to the clock mode.