Instruction manual
9
G-Series SP20004_REV_2
2SHUDWLQJ,QVWUXFWLRQV
72&200(1&(&877,1*
Depress the ³'HDGPDQV+DQGOH´ (Item 15)
Push the ³&\OLQGHU&RQWURO/HYHU´ (Item 16) forwards.
Pulsh the ³'ULYH&RQWURO/HYHU´(Item 14) forwards.
Set the ³7KURWWOH&RQWURO/HYHU´ to increase / reduce speed.
726723&877,1*
Pull the ³'ULYH&RQWURO/HYHU´(Item 14) backwards.
Pull the ³&\OLQGHU&RQWURO/HYHU´ (Item 16) backwards.
Release the ³'HDGPDQV+DQGOH´ (Item 15)
RELEASING THE “DEADMANS CONTROL LEVER” WITH THE CUTTER ENGAGED WILL
CAUSE THE ENGINE TO STOP
NOTE
),77,1*7+(*5$66%2;,WHP
Disengage the cylinder drive and wait for the cutter to stop rotating
Hold the grassbox ¿rmly on the lip of the aperture, place the lower front of the box against the front of the
tubular cradle.
Pivot the box about the cradle until it sit securely in position.